Specifications; Functional Description - Hercules HC75B Owner's Manual & Safety Instructions

SPECIFICATIONS

Battery
No Load Speed
Stroke Length
SETUP–BEFORE USE
Read the ENTIRE IMPORTANT
SAFETY INFORMATION section at the
beginning of this manual including
all text under subheadings therein
before set up or use of this product.

Functional Description

1 2
1. Trigger Lock
2. Trigger
3. Blade Clamp Release Lever
4. Pivoting Shoe Lock
5. Pivoting Shoe
6. Battery Pack (sold separately)
Page 6
Hercules 20 V Li-ion
(sold separately)
0 – 3 000 SPM
1-1/8" (28 m m)
6 3 4
For technical questions, please call 1-888-866-5797.
Read the ENTIRE IMPORTANT
SAFETY INFORMATION section at the
beginning of this manual including
all text under subheadings therein
before set up or use of this product.
TO PREVENT SERIOUS INJURY FROM
ACCIDENTAL OPERATION:
Make sure that the Trigger is locked and Battery
Pack is removed before performing any procedure
in this section.
Charge battery after unpacking and before using the
tool. Follow instructions included with battery charger.
Installing / Removing Blade
1. Push the Blade Clamp Release Lever up and
insert the blade (sold separately) fully into the
Clamp. Release Lever to close Clamp.
2. Check that the Saw Blade is firmly locked in
place and that the teeth are pointed downward.
5
3. To remove blade, push the Blade Clamp
Release Lever up, remove blade from
Clamp and then release Lever.
WARNING! To prevent serious injury: Before
attaching Battery Pack for each use, wear work
gloves and pull on the Saw Blade to make
sure it is securely locked in the Clamp.
Blade Clamp
Release Lever
Shoe Lock
Adjusting Pivoting Shoe
1. Press the Pivoting Shoe Lock in and adjust
the Pivoting Shoe to the desired position.
2. Release the Shoe Lock to lock Shoe in place.
OPERATION
Tool Set Up
Battery Charging
Blade
Pivoting
Shoe
Item 64986