Toshiba e755 User Manual page 124

Chapter 8: Wi-Fi (IEEE 802.11b) WLAN Adapter
128 bits (ASCII):
13-digit ASCII characters or symbols can be entered in "Key".
64 bits (HEX):
Hexadecimal 10-digit English letters and numerals can be entered
in "Key". Letters and numerals that can be entered are 0-9 and A(a)
- F(f).
128 bits (HEX):
Hexadecimal 26-digit English letters and numerals can be entered
in "Key". Letters and numerals that can be entered are 0-9 and A(a)
- F(f).
Key ID:
This becomes enabled when WEP is selected. Select Key1 - Key4.
Key:
Enter the ASCII characters and symbols that correspond to the mode
selected. Different characters can be entered, depending on the
mode selected. Please refer to Wired Equivalent Privacy above.
If "64 bits (ASCII)" or "128 bits (ASCII)" have been selected, input of
letters or numerals above the upper limit is blocked. If "64 bits (HEX)"
or "128 bits (HEX)" have been selected, a warning prompt appears
if you enter anything other than the permitted numerals/letters.
Enable 802.1x authentication:
Check here to enable 802.1x validation function.
EAP type:
Select protocol for using 802.1x validation function.
TLS (EAP-TLS)
Protocol used by Windows 2000 Server, etc.
PEAP
Protocol use by Windows NET Server 2003, etc.
Enable server validation:
When 802.1x validation is performed, this confirms whether it is
connected to the right server. It should normally be checked for im-
proved security.
Please ask your network administrator for further details.
125