Huawei E352S Quick Start Manual

Thank you for choosing the Mobile Broadband USB
Stick. With your USB Stick, you can access a wireless
network at high speed.
Note:
This manual describes the appearance of the USB Stick, as well as the procedures for
preparation, installation, and removal. For operation details about the management
program, see the online help included in the management program.
Getting to Know Your USB Stick
The following figure shows the appearance of the USB Stick. It is provided only for
your reference. The actual product may be different.
2
1
2
3

USB Connector
It connects the USB Stick to a PC.

Strap Hole
You can tie the cap and the USB Stick together by threading a strap through the
strap holes, so that the cap will not be easily lost.

Indicator
It indicates the status of the USB Stick.
Green, blinking twice every 3s: The USB Stick is powered on.

Green, blinking once every 3s: The USB Stick is registering with a 2G network.

Blue, blinking once every 3s: The USB Stick is registering with a 3G/3G+ network.

Green, solid: The USB Stick is connected to a 2G network.

Blue, solid: The USB Stick is connected to a 3G network.

Cyan, solid: The USB Stick is connected to a 3G+ network.

Off: The USB Stick is removed.


MicroSD Card Slot
It holds a microSD card.

SIM/USIM Card Slot
It holds a Subscriber Identity Module (SIM)/Universal Subscriber Identity Module
(USIM) card.
Getting Your USB Stick Ready
Installing the SIM/USIM card
1. Turn the cover containing an indicator upward, and then remove the cover from
the bottom.
2. Insert the SIM/USIM card into the corresponding card slots, as shown in the
following figure.
3. To replace the cover, fit the locking hooks in their slots first and then press down
until the cover locks into place.
Installing the microSD card
5
4
1
2