After Use; User Maintenance Instructions - Panasonic EH-SA31VP Operating Instructions Manual

5
5
Slide the power switch downwards to
turn off the appliance.
● After using the appliance, take care of your skin
by moisturizing with lotion, performing
cleansing, etc. If you do not take care of your
skin, water will evaporate from it, making it dry.

After use

● Do not tilt, shake, or transport the main unit within 10 minutes after use.
● Be sure to discard the water in the tank and the main unit every time after use.
Failure to do so may cause adhering of water stains or unusual odors.
1
1
Leave the appliance alone to cool for at least 10 minutes.
2
2
Remove the plug from the power outlet.
3
3
Remove the appliance plug from the main unit.
4
4
Remove the water supply tank from the main unit.
● Pull up on the water supply tank.
● Remove the tank in a water-safe location as water droplets
may drip from the tank.
5
5
Discard the water in the water supply tank.
● Wipe away any water on the surface of the water
supply tank.
10
10-11
6
6
Discard the water in the main unit.
● Discard the water from the water outlet
in the direction of the "Drain" arrow
while pushing the inclination switch on
the bottom of the main unit.
● When disposing of the water, hold the
main unit so that your hands are not
exposed to the hot water. Failure to do
so may result in burns.
7
7
Attach the water supply tank.
● Push the water supply tank into the main unit until it clicks.
8
8
Wipe off any water from the appliance.
● Remove all the water in the water supply tank and main unit when not using
the main unit for extended periods of time (several weeks or more). Store
the main unit only after sufficiently drying the main unit.
USER-MAINTENANCE INSTRUCTIONS
Cleaning
Do not wash or soak the appliance in water.
Cleaning inside the main unit
● Clean once a month.
● To remove and prevent water scale deposits, let the appliance cool for at least
10 minutes after use and then clean according to the following steps.
1
1
Fill the water supply tank with water up to "FULL" mark and
close the water supply cap.
2
2
Attach the water supply tank to the main unit.
11
2013/11/06 16:44:05