Preparing The Environment - National Instruments PXIe-5632 Getting Started Manual

Manual VNA Calibration Kit, K-Type
Manual VNA Calibration Kit, N-Type
Automatic VNA Calibration Kit, K-Type, Male-Female, 70 KHz to 9 GHz
Phase-Equal Precision Adapter Kit, K-Type
Phase-Equal Precision Adapter Kit, N-Type
Precision Coaxial Cable, 0.6 m, K-Type, Male-Male
Precision Coaxial Cable, 0.6 m, K-Type, Male-Female
Precision Coaxial Cable, 0.6 m, K-Type Male to N-Type Male
Precision Coaxial Cable, 0.6 m, K-Type Male to N-Type Female
Calibrated 5/16" Torque Wrench, 8 in-lbs (0.9 Nm)

Preparing the Environment

Ensure that the environment you are using the NI 5632 in meets the following specifications.
............................................................................ Operating ambient temperature
(IEC-60068-2-1, IEC-60068-2-2)
............................................................................ Operating relative humidity
(IEC-60068-2-56)
............................................................................ Maximum altitude
............................................................................ Pollution Degree
Indoor use only.
Caution
hardware is completely dry and free from contaminants before returning it to
service.
Note Refer to the NI PXIe-5632 Specifications at
specifications.
4 | ni.com | NI PXIe-5632 Getting Started Guide
Table 1. NI 5632 Accessories
Accessory
Clean the hardware with a soft, nonmetallic brush. Make sure that the
0 °C to 55 °C
10% to 90%, noncondensing
2,000 m (800 mbar) (at 25 °C ambient
temperature)
2
ni.com/manuals
Part Number
781587-01
781588-01
782364-01
781595-01
781596-01
781607-01
781608-01
781609-01
781610-01
781615-01
for complete