Advertisement
1/2" CROWN AIR STAPLER
ASSEMBLY AND OPERATING INSTRUCTIONS
Diagrams within this manual may not be drawn proportionally.
Due to continuing improvements, actual product may differ slightly from the product described herein.
Distributed exclusively by Harbor Freight Tools
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our website at: http://www.harborfreight.com
Read this material before using this
product. Failure to do so can result in
serious injury.
SAVE THIS MANUAL.
Copyright
reserved. No portion of this manual or any artwork contained
herein may be reproduced in any shape or form without the
express written consent of Harbor Freight Tools.
For technical questions or replacement parts, please call 1-800-444-3353.
2008 by Harbor Freight Tools
©
97572
46365
. All rights
®
.
®
Advertisement
Table of Contents
Related Manuals for Central Pneumatic CROWN 46365
Summary of Contents for Central Pneumatic CROWN 46365
- Page 1 1/2” CROWN AIR STAPLER ASSEMBLY AND OPERATING INSTRUCTIONS Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product described herein. Distributed exclusively by Harbor Freight Tools 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our website at: http://www.harborfreight.com Read this material before using this product.
-
Page 2: Specifications
ITEM Overall Dimensions Wrenches Staple Specs. Operating Pressure Magazine Capacity Air Inlet Size Net Weight You will need the manual for the safety warnings and precautions, assembly instructions, operating and maintenance procedures, parts list and diagram. Keep your invoice with this manual. Write the invoice number on the inside of the front cover. - Page 3 Dress properly. Do not wear loose clothing or jewelry as they can be caught in moving parts. Protective, electrically non-conductive clothes and non-skid footwear are recommended when working. Wear restrictive hair covering to contain long hair. Use eye and ear protection. Always wear ANSI approved impact safety goggles.
- Page 4 for the Air Compressor, it must be of the proper size and type to supply the correct current to the tool without heating up. Otherwise, the extension cord could melt and catch fire, or cause electrical damage to the tool. If you are using the tool outdoors, use an extension cord rated for outdoor use.
-
Page 5: Maintenance
13. Do not use this tool if it is not loaded, as this will accelerate wear on the tool. 14. Be sure all hoses and fittings are free from damage and dirt. Replace any part that does not appear to be operating properly. Warning: People with pacemakers should consult with their physician(s) before using this product;... -
Page 6: Air Connection
STAPLER Note: Air Compressor is not supplied. You may use Quick-Couplers and Quick-Connectors (not supplied) as shown in the diagram above. Do not connect Couplers directly to the Air Inlet. Doing so will increase the overall bulk of the tool and strain the inlet threads. Read and follow all safety precautions as listed on Pages 2-5 of this manual. -
Page 7: Operation
Slide the Magazine Assembly back into place until it clicks. Grip the Body [18] of the Stapler with both hands and press the Nozzle [19] against the surface you wish to staple. Be sure to keep your hands, fingers and other body parts away from the Nozzle. Depress the Trigger [28] to activate the Stapler. - Page 8 97572 46365 Page 8...
- Page 9 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.
Need help?
Do you have a question about the CROWN 46365 and is the answer not in the manual?
Questions and answers
how do i check and service the tool
To check and service the Central Pneumatic tool with part number CROWN 46365:
1. Check for Damage: Before using, inspect the tool for damaged parts. Look for misalignment, binding of moving parts, broken parts, or any other condition affecting operation. Have damaged parts repaired or replaced by a qualified technician.
2. Use Proper Replacement Parts: Only use identical replacement parts. Using other parts will void the warranty. Use only approved accessories intended for the tool.
3. Prevent Electric Shock: Avoid body contact with grounded surfaces like pipes or appliances.
4. Avoid Use Under Influence: Do not operate the tool under the influence of alcohol or drugs.
5. Lubrication: Lubricate the tool during operation. An in-line oiler and water filter are recommended to extend tool life.
6. Air Supply Setup:
- Use a 1/4” NPT size fitting.
- Screw a Union Fitting into the air plug using a wrench.
- Optionally attach a Quick-Connector for easy hose changes.
- Adjust air pressure as needed for proper staple depth.
7. Disconnect Before Loading: Always disconnect the tool from the air hose before loading staples.
8. Use Correct Staples: Only use the staple size/type specified in the manual.
9. Storage: Store the tool in a dry place when not in use. Keep the manual and invoice for reference.
This answer is automatically generated