Samsung ET-WV525 User Manual page 25

Internet Connection Type: L2TP (Username / Password)
Choose L2TP (Layer 2 Tunneling Protocol) if your ISP uses a L2TP connection. Your ISP will provide you with a username
and password. This option is typically used for DSL services.
The following parameters can be configured:
Address Mode:
L2TP IP Address:
L2TP Subnet Mask:
L2TP Gateway IP Address: Enter the L2TP Gateway IP address used here.
L2TP Server IP Address:
Username:
Password:
Verify Password:
Reconnect Mode:
Maximum Idle Time:
Primary DNS Server:
Secondary DNS Server:
S W R
AMSUNG IRELESS OUTER
Here the user can specify whether this Internet connection requires the use of a Dynamic
or Static IP address. L2TP usual requires a Dynamic IP configuration.
Enter the L2TP IP address used here. This option is only available if Static IP is selected.
Enter the L2TP Subnet Mask used here.
Enter the L2TP Server IP address used here. This is normally the same a the PPTP Gate-
way IP address.
Enter the L2TP username used here.
Enter the L2TP password used here.
Re-enter the L2TP password used here.
Use the radio buttons to specify the reconnect mode. The user can specify a custom
schedule or specify the On Demand, or Manual option. To specify a custom sched-
ule, use the drop-down menu to select one of the schedules that has been defined in the
Schedules page. To create a new schedule, click the New Schedule button to open the
Schedules page. Schedules will be discussed later.
Enter a maximum idle time during which the Internet connection is maintained during
inactivity. To disable this feature, enable Auto-reconnect.
Enter the Primary DNS IP address used here.
Enter the Secondary DNS IP address used here. This field is normally optional. Only one
DNS address is required for a functional Internet connection, but using a second DNS
address provides more stability.
U M
SER ANUAL
P 25
AGE