Image Stabilizer - Canon 4318C002 Instructions Manual

7. Image Stabilizer

Image stabilization corrects vibrations that occurs with hand-held shots.
Image stabilizer switch
1
Set the STABILIZER switch to ON.
If you are not going to use image stabilization, set
z
the image stabilizer switch to OFF.
Image Stabilizer modes
MODE 1: Corrects vibrations in all directions.
z
It is suited to shooting still subjects.
MODE 2: When you take a panning shot either horizontally or vertically, corrects vibrations at right
z
angles to the direction of panning.
It is suited to shooting moving subjects.
MODE 3: During exposure, corrects vibrations in the same way as MODE 2.
z
Since vibration is corrected only during exposure, It is suited to shooting irregularly
moving subjects.
Image stabilizer mode selector switch
2
Select an Image Stabilizer mode
according to the application and shooting
conditions.
ENG-10