USER MANUAL THANK YOU FOR BUYING A WHILPOOL PRODUCT. In order to receive a more complete assistance, www.whirlpool.eu/register please register your appliance on INDEX HEALTH & SAFETY GUIDE ..............3 Safety Instructions .
Health & Safety guide SAFETY INSTRUCTIONS IMPORTANT TO BE READ AND OBSERVED Before using the appliance, read these safety Move the appliance without lifting it by the instructions. Keep them nearby for future reference. worktop or top lid. These instructions and the appliance itself provide Installation, including water supply (if any) and important safety warnings, to be observed at all electrical connections and repairs must be carried...
Page 4
Health & Safety guide DISPOSAL OF PACKAGING MATERIALS Use only new hoses to connect the appliance to The packaging material is 100% recyclable and is marked with the recycle the water supply. The old hose-sets should not be symbol reused. The various parts of the packaging must therefore be disposed of responsibly and in full compliance with local authority regulations The supply water pressure must be in the...
User manual PRODUCT DESCRIPTION Worktop Detergent dispenser Control panel Door handle Door Water lter - behind plinth Plinth (removable) Adjustable feet (4) DETERGENT DISPENSER Main wash compartment • Detergent for the main wash • Stain remover • Water softener • For a liquid detergent it is recommended to use removable plastic partition A (supplied) for a proper dosage.
User manual OPTIONS ! If the selected function is incompatible with the set programme, the incompatibility will be signalled by a buzzer (3 beeps). ! If the selected function is incompatible with another previously set function the function will not be enabled. START DELAY TEMPERATURE To set the selected programme to start at a later time,...
User manual PROGRAMME CHART Max load 6 Kg Recommended Detergents and additives Power consumption in o -mode 0.5 W / in left-on mode 8.0 W detergent Main Temperatures Max. spin Prewash Softener wash Duration Programme speed load Powder Liquid (Minutes) (kg) (rpm) Default...
User manual HOW TO USE THE APPLIANCE FIRST TIME USE Start the programme without adding any laundry (with Remove any manufacturing debris: • • Select the “Cotton” programme at a temperature of empty drum). 60°C. • See section “DAILY USE” for more information on how to •...
Page 10
User manual 5. Add detergent 10. Switch o the washing machine after programme End Pull out the detergent dispenser and add • At the end of the cycle, the message "END" is shown on detergent (and additives/softener) into the relative the display.
User manual DISPLAY INDICATORS This indicator will light up: Door locked • after you have started a programme • the porthole door is locked This indicator will light up: FreshCare+ • after you set the Freshcare+ option This indicator will light up: Start delay •...
User manual CLEANING & MAINTENANCE For any cleaning and maintenance, switch o and unplug the washing machine. Do not use ammable uids to clean the washing machine. CLEANING THE OUTSIDE OF THE WASHING MACHINE Use a soft damp cloth to clean the outer parts of the washing Do not use glass or general purpose cleaners, scouring machine.
User manual CLEANING THE MESH FILTERS IN THE WATER SUPPLY HOSE Close water tap and unscrew the inlet hose. Now unscrew the inlet hose on the back of the washing machine by hand. Pull out the mesh lter from the valve on the back of the washing machine with pliers and carefully clean it.
User manual CLEANING THE WATER FILTER / DRAINING RESIDUAL WATER Switch o and unplug the washing machine before cleaning the water lter or draining residual water. If you used a hot wash programme, wait until the water has cooled down before draining any water. Clean the water lter regularly, to avoid that the water cannot drain after the wash due to obstruction of the lter.
User manual TROUBLESHOOTING Your washing machine is equipped with various automatic These failures are frequently so minor that they can be safety and feedback functions. They enable failures removed within a few minutes. and needed maintenance to be detected and indicated accordingly.
User manual DOOR HOW TO OPEN IT IN CASE OF A FAILURE, TO TAKE OUT YOUR LAUNDRY Switch o the washing machine and unplug it. Close the water tap. Wait until the drum has stopped rotating. Never open the door while the drum is in motion. Wait until water and laundry have cooled down when washing with high temperatures.
To receive assistance, call the number shown on the warranty • the service number (number after the word Service on booklet or follow the instructions on the website the rating plate). www .whirlpool. eu When contacting our Client After-sales service, always specify: • a brief description of the fault;...