Reading the Status Display
You can display the operating status of the projector on the projected
image. You can check the detailed status of the projector by using button
operations.
a
Press the [ ] button while projecting.
Remote control
b
Select Status Information, and then press the [
a
You can also operate from the Configuration menu.
s Info - Status Information
Control panel
] button.
p.145
c
Use the [ ][ ] buttons or the [
category.
Each display category contains the following information.
Status Information
:
Operating status of the projector
Source
:
Input signal information
Signal Information
:
Input digital signal information
Network Wired
:
Wired LAN settings
Network Wireless
:
Wireless LAN settings
Maintenance
:
Operating time for the projector and light source
Version
:
Projector's firmware version
163
][
] buttons to select a