Table of Contents
Advertisement
Charging the Tablet
The current battery status will be always displayed in the
top right of the screen in the system information bar.The
battery icon
will change in accordance with the battery
status.
When connected to the DC charger, the status area on
the top bar will display the
lightning symbol inside the battery icon.
To charge the battery:
1. Plug one end of the included power adapter into an
AC 100-240V outlet.
2. Plug the other end of the included power adapter into
the power jack on the tablet.
3. Disconnect the power adapter when the tablet is fully
charged.
The battery used in this device may cause a fire
or chemical burn if mistreated. Do not disassemble,
incinerate or heat the device. Do not leave the
device in direct sunlight, or in a car with its
windows closed. Do not connect the device to a
power source other than that which is indicated
here or on the label as this may result in a fire or
electric shock.
Battery protection and low battery may cause your
tablet fail to boot,please charge the battery.
Page 10
charging icon. Note the
Inserting a memory Card
The tablet accepts microSD memory cards. Insert a
memory card into the microSD card slot to:
Increase the memory capacity of your tablet
Play media files stored on the memory card (e.g.,
music, video or photo files).
To insert a memory card:
1. Align the memory card with the card slot. The metal
contacts of the memory card should face down away
from the LCD screen.
2. Slide the card into the spring-loaded slot. Push the
card in until it clicks into place.
Do not attempt to insert objects other than a
microSD memory card into the card slot. A
compatible memory card should fit easily into
the card slot. If you encounter resistance, check
the alignment of the card. Do not attempt to
force the card in.
Avoid touching the gold contacts of the memory
card.
Getting To Know The Tablet
Advertisement
Table of Contents
