Table of Contents
Advertisement
∫ To switch to network speaker mode
Turn SC-ALL70T and SC-ALL2 off and then turn SC-ALL2 on again.
≥ The network indicator will light up or blink.
≥ The audio source will change to the network.
∫ To switch to rear surround mode
Touch and hold [AUX] and [6] on each SC-ALL2 for at least 4 seconds.
≥ The network indicator will go off.
≥ The pairing mode is cancelled after about 2 minutes elapses. You can also
touch [Í/I] to cancel it.
≥ When this unit is in rear surround mode, turning the paired SC-ALL70T on/off
will automatically turn this unit on/off.
≥ The below functions are not available when this unit is paired as rear surround
speaker.
– Streaming music by network
– Alarm/Sleep timer
– Changing to other selector (AUX, Bluetooth
– Volume switches on this unit
≥ You cannot adjust the delay time with this unit.
, Network)
®
- 37 -
Advertisement
Table of Contents
