Yamaha MusicCast RX-V483 Owner's Manual page 39

Setting up the wireless connection manually
If you select "Manual Setting" as the connection method, the wireless connection
setting screen appears on the TV.
You need to setup the SSID (network name), encryption method and security key
for your network.
1
Use the cursor keys (q/w) to select "SSID" and press ENTER.
2
Use the cursor keys and ENTER to enter the SSID of the
access point.
When finished entering the key, select "OK" to return to the previous
screen.
3
Use the cursor keys (q/w) to select "Security" and the cursor
keys (e/r) to select the encryption method.
Choices
None, WEP, WPA-PSK(AES), Mixed Mode
Note
If you select "None", the connection may be insecure since the communication is not
encrypted.
4
Use the cursor keys (q/w) to select "Security Key" and press
ENTER.
Note
If you select "None" in step 3, this item is not available.
5
Use the cursor keys and ENTER to enter the security key.
If you select "WEP" in step 3, enter either 5 or 13 character string, or
10 or 26 hexadecimal digits.
If you select the method other than "WEP" in step 3, enter either 8 to
63 character string, or 64 hexadecimal digits.
When finished entering the key, select "OK" to return to the previous
screen.
6
Use the cursor keys (q/w) to select "Connect" and press
ENTER to start the connection process.
When the connection process finishes, "Completed" appears on the
TV screen.
If "Not connected" appears, check that all the information is entered
correctly, and repeat from step 1.
7
To exit from the menu, press SETUP.
39
En