Epson LabelWorks PX User Manual page 38

Changing the LW-PX900 Settings
Auto cut
Sets whether or not to cut automatically.
When "Auto cut"is set to " On ", the function (Half cut) for
precutting just the label part to make the backing paper
easy to peel off is set.
Print density
Sets the print density.
Drop stop
This function is useful for affixing consecutively printed
labels one at a time.
When "On" is selected, printed labels will not be scattered
because they are stacked in the tape eject slot and a label is
output each time a label is removed.
This function is only available when the label length is
28 mm or more, "Auto cut" is set to "On", and "Half cut" is set
to "Off".
Die-Cut pos
Adjusts the text position of die cut label.
Width pos: Adjusts the vertical positioning of text.
Length pos: Adjusts the horizontal positioning of text.
Backlight
Sets the display backlight to On or Off.
Language
You can select the language shown on the display from the
following:
Dansk, Deutsch, English, Español, Français, Italiano, Nederlands,
Norsk, Português-Br, Português-EU, Suomi, Svenska, Türkçe
+
inch:cm
The unit of length used to indicate the label size can be
switched between inch and cm.
MEMO
Version: To make sure the version number that has been installed in
the printer.
Procedure for setting
1. Press + .
2. Select the desired function with
press .
3. Select the desired item with
Top
Safety Instructions
Specifications
Troubleshooting
Part Names and
Functions
Start Here
/ and
Cleaning
/ and press .
Initializing the
Settings
Purpose-based Index
Key Menu Index
Frame and Table Lists
38