Table of Contents
Advertisement
Quick Links
Installation Guide
Thank you for purchasing our product.
This manual provides important information about safe and proper
operations of this Switching Hub.
Please read the "Important Safety Instructions" on pages 3 to 5.
Any problems or damage resulting from disassembly of this Switching Hub
by customers are not covered by the warranty.
The instruction manuals (CLI Version, Web Version), latest
firmware and SDN application (ZEQUO assist Plus) can be
downloaded from the following URL.
https://panasonic.co.jp/ls/plsnw/english/datadownload/index.html
2-12-7, Higashi-Shimbashi, Minato-ku, Tokyo Japan, 105-0021
©
Switch-M16eG
Model No.
2021
I0716- 20721
PN28160K-TH
PN28160K-MY
PN28160K-ID
PN28160K-SG
Printed in Japan
Advertisement
Table of Contents
Related Manuals for Panasonic M16eG
Summary of Contents for Panasonic M16eG
- Page 1 Switch-M16eG Installation Guide PN28160K-TH Model No. PN28160K-MY PN28160K-ID PN28160K-SG Thank you for purchasing our product. This manual provides important information about safe and proper operations of this Switching Hub. Please read the "Important Safety Instructions" on pages 3 to 5.
-
Page 2: Table Of Contents
Contents Important Safety Instructions Basic Instructions for the Use of This Product 1. Product Outline 1.1 Features 1.2 Specifications 1.3 Accessories 1.4 Basic operation 2. Part Names and Functions 2.1 LED display change 3. Installation and Configuration 3.1 Mounting to rack 3.2 Configuration of IP address (Basic) Troubleshooting 18... -
Page 3: Important Safety Instructions
Important Safety Instructions This chapter contains important safety instructions for preventing bodily injury and/or property damage. You are required to follow them. Severity of bodily injury and/or property damage, which could result from incorrect use of the Switching Hub, are explained below. WARNING This symbol indicates a potential hazard that could result in serious injury or death. - Page 4 WARNING Do not put the Switching Hub into fire. Deviation could lead to explosion and/or fire. Do not insert nor drop any foreign objects such as metal or readily combustible things into the inside through the openings, twisted pair ports, console ports, or SFP extension slots.
- Page 5 CAUTION This Switching Hub is to be periodically serviced in order to maintain its performance. Please choose a product administrator, and have them be sure to implement period- ic maintenance. When doing maintenance, check the inspection chart that is posted on our website which has the requisite items listed on it.
-
Page 6: Basic Instructions For The Use Of This Product
SFP extension slot,operation is not guaranteed.For the latest information about compatible SFP extension modules,check our website. 1. Please note that Panasonic shall not bear any liability whatsoever for any damages (this shall include lost earnings, lost opportunities, etc. but this is not restricted to these... -
Page 7: Product Outline
Product Outline Switch-M16eG is an all Giga bit Ethernet Switching Hub with management function having 14 ports of 10/100/1000BASE-T and two pairs of 10/100/1000BASE-T port and SFP extension slot, one of which is selectable. 1.1 Features Has wire-speed Layer 2 switching function. -
Page 8: Specifications
Product Outline 1.2 Specifications Interface Twisted pair port 1-16:RJ45 connecter Transmitting and receiving network system IEEE 802.3 10BASE-T IEEE 802.3u 100BASE-TX IEEE 802.3ab 1000BASE-T Energy Efficient Ethernet function IEEE 802.3az(LPI) SFP extension slot port15,16 Transmitting and receiving network system IEEE 802.3z ※RJ45 or SFP either exclusive use SFF-8472 (DMI:Diagnostic Monitoring Interface) Console port:RJ45 connecter... -
Page 9: Accessories
Port LED does not light up. When the Eco mode is set,Port LED lamps do not light up. * For configuration and management method, please see the PDF version of the Operating Instructions on Panasonic’s website. -
Page 10: Part Names And Functions
Part Names and Functions MAC Address label 10/100/1000BASE-T port LED display change button RIGHT LED(ORANGE):LOOP DETECTION SFP▲ Front panel Switch-M16eG POWER LED DISPLAY ANY COL. CONSOLE CHANGE BUTTON 9600.N.8.1(DTE) STATUS/ECO KEEP PRESSING 3SEC ECO MODE ON/OFF GIGA 100M FULL LOOP HISTORY SFP▼... - Page 11 Power LED Collision LED Status/ECO mode LED LED display change GIGA mode LED button Speed modeLED DUPLEX mode LED Loop history mode LED POWER (Power) LED Green Light : Power is ON. : Power is OFF. ANY/COL. (Collision) LED Orange Light : During half-duplex operation, packet collision is occurring in either port.
- Page 12 Part Names and Functions Table1. Ports and Port LED lamps 1 to 16 correspond as shown below. Port LED Display mode Behavior Description Green Light Link is established. STATUS/ECO Green Blink Transmitting and receiving data. No device connected. Green Light Link is established at 1000 Mbps.
-
Page 13: Led Display Change
2.1 LED display change ●Display style set by the LED display change button Indication on the front panel and LED lamps RIGHT LED(ORANGE):LOOP DETECTION £ Switch-M16eG POWER LED DISPLAY ANY COL. CONSOLE CHANGE BUTTON 9600.N.8.1(DTE) STATUS/ECO KEEP PRESSING 3SEC ECO MODE ON/OFF... - Page 14 Part Names and Functions Switch two types of Base modes and their LEDs in the following way: When Base mode is Status mode (factory default setting) Press "LED DISPLAY CHANGE BUTTON" manually. Automatic Boot Automatically returns to Base mode after 1 minute. Status mode DUPLEX Loop History...
-
Page 15: Installation And Configuration
Installation and Configuration 3.1 Mounting to rack Take out the provided mount brackets (2pcs.)and eight screws (for fixing the mount brackets and the Switching Hub).Fix the mount brackets to the four holes on each side of the Switching Hub using the screws. Then,securely install the Switching Hub on the rack using the four provided screws (for mounting on a 19-inch rack) or screws provided with the rack. -
Page 16: Configuration Of Ip Address (Basic)
Installation and Configuration 3.2 Configuration of IP address (Basic) (1) Connect this Switching Hub and PC with a RJ45–DSub 9-pin console cable and start up the terminal emulator (ZEQUO assist Plus, etc.). (2) Pressing Enter key 3 times opens Login screen. Enter Login name and Password (the default is "manager"... - Page 17 Screen 3 Screen 4 Screen 5 * For detailed configuration and management methods, and the settings from the ZEQUO assist Plus and the Web screens, please see the PDF version of the Operating Instructions on Panasonic’s website.
-
Page 18: Troubleshooting
Troubleshooting If you find any problem, please take the following steps to check. LED The POWER LED (Power) is not lit. Check if the power cord is disconnected. Please confirm that the power cord is securely connected to the power port. The Port LED is not lit in Status mode.
Need help?
Do you have a question about the M16eG and is the answer not in the manual?
Questions and answers