Table of Contents
Advertisement
physical dimensions, construction, and electrical and RF characteristics.
This USB Modem must not be collocated or operate in con-junction with
any other antenna or transmitter. Use of this device in any other
configuration may exceed the FCC RF Exposure compliance limit.
SAR information on this and other model devices can be viewed on-line
at www.fcc.gov/oet/fccid.
This site uses the device FCC ID number,
A3LGTB1110.
Sometimes it may be necessary to remove the battery
pack to find the number. Once you have the FCC ID number for a
particular device, follow the instructions on the website and it should
provide values for typical or maximum SAR for a particular device.
Additional product specific SAR information can also be obtained at
www.fcc.gov/cgb/sar.
Consumer Information on devices
The U.S. Food and Drug Administration (FDA) has published a series of
Questions and Answers for consumers relating to radio frequency (RF)
exposure from devices. The FDA publication includes the following
information:
What kinds of pdevices are the subject of this update?
The term device refers here to hand-held devices with built-in
antennas, often called cell,
mobile, or PCS devices. These types of
devices can expose the user to measurable radio frequency energy
(RF) because of the short distance between the device and the user's
head. These RF exposures are limited by Federal Communications
Commission safety guidelines that were developed with the advice of
FDA and other federal health and safety agencies. When the device is
located at greater distances from the user, the exposure to RF is
35
Advertisement
Table of Contents
