Avermedia AVerAI D111NX User Manual page 26

[24685.229132] usb 1-7: Manufacturer: NVIDIA Corp
2. Using the commands below in the Linux PC to start re-flashing BSP
1. Decompress by root
2.Enter L4T directory
3.Connect a Jetson platform and a
host PC(*) through a Micro USB to
USB Cable
4.(optional)Select one profile for
MIPI CSI camera;
if don't select MIPI CSI camera,
default is 2x raspberry_pi_v2
5. Enter the recovery mode
6. Start to flash BSP
7.Flash more modules (speed up)
D111NX_D111NO User Manual
sudo tar zxvf EN715-R1.0.*.tar.gz (for D111NO)
sudo tar zxvf EN715-NX-R1.0.*.tar.gz (for
D111NX)
cd JetPack_*.**/Linux_for_Tegra
*The host PC must be a physical Ubuntu 18.04
PC with x64 CPU, not a virtual machine or Jetson
platform.
sudo ./setup.sh
power off -> press recovery button -> power on ->
wait 2 seconds -> release recovery button
a. Use default user account. ( user_name/password:
nvidia )
sudo ./install.sh
b. Create other user name and password as default
user
sudo ./install.sh --create_default_account
sudo ./install.sh -r
25
AVerMedia Technologies, Inc www.avermedia.com