Recording From A Cd (Cds) - Sharp CD-BK3200V Operation Manual

Recording from a CD (CDs)

E-37 ENGLISH
Programmed Play (See page 22.)
You can record the desired CD using the 1 -
1
Press the ON/STAND-BY button to turn the power on.
2
Load a cassette into the TAPE 2 cassette compartment with side A
facing you.
Wind past the leader of the tape, on which recording cannot be performed.
3
Press the CD/VIDEO CD (CD) button and load the desired disc.
4
Press the button to choose
one side or both sides.
... To record on both sides.
... To record on only one side.
5
Press the REC PAUSE [
(TAPE)] button.
Recording will be paused.
6
Press one of the 1 - 6 buttons to start recording.
z To record on both sides, begin on side A. (If recording is started from side B,
the tape will not switch over to side A.)
z Recording is started from the selected CD. When the playback of the last disc
is finished or the end of the tape is reached, the CD and the cassette will stop
automatically.
z CD playback will start approximately 5 seconds after the tape starts.
Recording from several CDs continuously:
1 Follow the above steps 1 - 5.
2 Press the ( /SELECT/RESUME) button to record on side A, or the
for side B.
Recording will start from the disc of the lowest number.
To perform programmed recording:
1 Programme discs and tracks. (See page 22.)
2 Press the REC PAUSE [ (TAPE)] button.
3 Press the ( /SELECT/RESUME) button to record on side A, or the
for side B.
To stop recording:
Press the ( /RETURN) button.
The CD and tape will stop.
Auto restart function:
If the recording side is switched from side A to B during recording, the system will
record the interrupted track on side B from its beginning. The recording will be made
without cutting the beginning of the track on side B.
01/5/29 CD-BK3200V(X)E4.fm
6 buttons.
button
button