Installation - ML Accessories OWALL1 Series Installation & Maintenance Manual

• Please isolate mains prior to installation or maintenance
Check the total load on the circuit (including when this luminaire is fitted) d
•
the circuit cable, fuse or circuit breaker
Please note the IP (Ingress Protection) rating of this product when decidin
•
This product is Class I and must be earthed
•
This product is IP54 rated
•

INSTALLATION

Note - If this luminaire is being used in conjunction with an external PIR or sensor,
manufacturer of the sensors that they are compatible with the lamps being used
Provide power to the required point of installation. Suitable IP rated junctio
•
where required
Round cable should be used for the mains supply. The use of flat cable wi
•
fitting
Remove the baseplate from the luminaire by loosening the screws on eithe
•
Using the baseplate as a template, mark the location for, and drill the fixing
•
infringe with any gas/water pipes or electrical cables
• Feed the mains cable through the rubber grommet to retain IP rating
Fix the baseplate using the screws and wall plugs provided (see Fig. 1)
•
Fig. 1