Related Manuals for HPC Laser LS1390
Summary of Contents for HPC Laser LS1390
- Page 1 HPC LASER LTD LS1390 IPG FIBER LASER USER MANUAL HPC LASER LIMITED – NEVER LEAVE YOUR MACHINE UNATTENDED WHEN OPERATING.
- Page 2 Tel: 01422 310800 Email: sales@hpclaser.co.uk HPC LASER cannot be held responsible for any direct or indirect damages, which result from using or working with the products electric circuits or software described herein. The apparatus must be used only by trained and skilled personnel.
- Page 3 4. OPERATIONS…………………………………………………………………………………….. • Machine view front…………………………………………………………………….. • Machine view right side………………………………………………………………. • Machine view back……………………………………………………………………… • On/Off Switch……………………………………………………………………………… • Keypad………………………………………………………………………………………… • Cutting Table……………………………………………………………………………….. 5. MAINTENANCE…………………………………………………………………………………... • Cleaning the system……………………………………………………………………… HPC LASER LIMITED – NEVER LEAVE YOUR MACHINE UNATTENDED WHEN OPERATING.
- Page 4 Caution: NEVER stare directly at the laser beam. Strictly observe possible dangers of the laser beam. The HPC Laser laser cutter LS1390, is used for engraving and cutting of signs, metal panels and suchlike. HPC LASER LIMITED – NEVER LEAVE YOUR MACHINE UNATTENDED WHEN OPERATING.
- Page 5 Electronic devices have to be disposed according to reginal directives on electronic and electric waste disposal. In case of further queries please contact HPC. We could take care of the disposal. HPC LASER LIMITED – NEVER LEAVE YOUR MACHINE UNATTENDED WHEN OPERATING.
-
Page 6: Machine Specification
MACHINE SPECIFICATION; HPC LASER LIMITED – NEVER LEAVE YOUR MACHINE UNATTENDED WHEN OPERATING. - Page 7 • Chiller Unit, fan system and exhaust pipe included in the price. • Automatic height control • Professional on-board computer control system • Fully enclosed cabinet for safety • Bed size 1300x900 HPC LASER LIMITED – NEVER LEAVE YOUR MACHINE UNATTENDED WHEN OPERATING.
-
Page 8: General Safety Information
Operation Manual must be observed. Laser safety goggles are available to purchase from HPC Laser. Please contact for any information and for purchasing. Please contact HPC Laser for any retooling, changing of workplace for advice on what is needed and in-case of an engineer being needed to visibly see the machine and the issue and/or change. -
Page 9: Laser Safety Information
Dangerous radiation exposure can result from the use of operation or adjustment equipment other than that described here, and if different operational methods are performed. HPC LASER LIMITED – NEVER LEAVE YOUR MACHINE UNATTENDED WHEN OPERATING. -
Page 10: Warning And Information Labels
Chiller and if so the potential risk of laser beam hazards water should be left to raise or and fire risks. lower to 20⁰. HPC LASER LIMITED – NEVER LEAVE YOUR MACHINE UNATTENDED WHEN OPERATING. - Page 11 (isolator) found on the bottom right of the machine. We advise not to enter this when the machine is switched on. If doing planning to do so please contact HPC Laser. HPC LASER LIMITED – NEVER LEAVE YOUR MACHINE UNATTENDED WHEN OPERATING.
- Page 12 Safety labels found on the reverse of the machine show the operator there is a high risk of the laser becoming exposed. Again please leave closed when in operation. HPC LASER LIMITED – NEVER LEAVE YOUR MACHINE UNATTENDED WHEN OPERATING.
-
Page 13: Before Usage
BEFORE USAGE If not being installed by a specialist engineer from HPC Laser you will receive your LS1390 Metal Cutting machine in a wooden crate, which contains the laser its self and additional accessories. A suitable-fork lift is required to unload from the courier vehicle and lift the machine off its pallet. -
Page 14: On/Off Switch
LOCATIONS If installing the HPC Laser machine yourself, you should select an appropriate location. Follow the guidelines shown below: • Avoid locations where the system is exposed to high temperatures, dust and high humidity (The humidity must not exceed 70% and the temperature must not be close to the dew point). -
Page 15: General Cleaning
1 Move the laser head so it is easier to access the work area to clean it, and also to the place where you need to clean. 2 Again please make sure the machine is fully switched off and unplugged. HPC LASER LIMITED – NEVER LEAVE YOUR MACHINE UNATTENDED WHEN OPERATING. - Page 16 CE MARKING CERTIFICATES / DECLARATION OF CONFORMITY MD + EMC HPC LASER LIMITED – NEVER LEAVE YOUR MACHINE UNATTENDED WHEN OPERATING.
- Page 17 HPC LASER LIMITED – NEVER LEAVE YOUR MACHINE UNATTENDED WHEN OPERATING.
Need help?
Do you have a question about the LS1390 and is the answer not in the manual?
Questions and answers