CAUTIONS
1.In areas with heavy traffic, please do not wear earphone to avoid an
accident.
2. Always obtain permission before searching any site.
3. Keep away from the region where may bury the electrical line, cable
line or pipeline, especially the pipes that are full of flammable gases
and liquids.
4. Do not detect in the military area where may bury bombs or gas
explosives.
5. When excavating the target, use the reasonable method and do not
destroy the vegetation. Leave the land and vegetation as it was and fill
in the holes after the excavation.
TROUBLE SHOOTING GUIDE
SYMPTOMS
No power, no boot sound, and
the LCD has no indication.
Sound a successive "DI""DI"
tone
The LCD displays normal, but the
unit has no detection function.
The LCD displays normal, but the
sensitivity is very low.
1.Be sure that the batteries are
installed correctly.
2.Replace the batteries.
1.Make sure that there is no other
metal detector operated around.
2.Release the sensitivity properly.
The connection of the search coil is
bad. Plug in the cable plug.
When turning on, there is metal
near the search coil. Let the search
coil keep away from the ground, and
then turn on the unit again.
16
SOLUTIONS
Need help?
Do you have a question about the OT-MD06 and is the answer not in the manual?
Questions and answers
Why does my unit default to a 99 number after four or five minutes?