Panasonic FZ-VCN401 Manual

Rear Expansion Area
You can select from the following options.
FZ-VCN401
VGA Port / Serial Port / 2nd LAN
Port
Inserting an option to the rear expansion area
1. Turn off the computer and disconnect the AC adaptor.
IMPORTANT
We recommend that you turn off the computer completely the following.
l
1. Click
2. Click [Restart now] in "Advanced startup".
3. Click [Restart now] on the "We'll restart your device so save your work" screen.
4. Click [Turn off your PC].
2. Remove the battery pack. (
<When using second battery pack>
l
Remove the second battery pack. (
3. Slide the latch (A) to the arrow direction.
4. Open the cover (B).
5. Insert an option to the rear expansion area.
If an option has not been inserted, proceed to step 2.
l
1. Remove the screws (C) and pull the tab (D) to pull out an option.
Use the PH 1 (PH #1) screwdriver.
FZ-VCN402
Serial Port / USB 3.2 Gen 1 (Type-A) Port /
HDMI Port
(Start) - [Settings] - [System] - [Recovery].
Replacing the Battery Pack)
Replacing the Battery
USB 3.2 Gen 1 (Type-A) Port / USB 3.2 Gen 1 (Type-A) Port /
HDMI Port
Pack)
FZ-VCN403