Brigade LS-60-A Installation & Operation Manual

1

Wire Connections

Wire Colour Vehicle Connection
Black Power Supply Negative (0V)
Red Power Supply Positive +12/24Vdc, fused and non permanent
Green Speed Pulse Input (e. g. tachograph pin no. B8, 4 pulses per meter distance)
Pink Control of Programming & Reading Modes
Purple Switch Power Output
Warning: Switch output maximum current is 1.2A. Use a relay if higher current
2

Normal Operation

Switch Power Output ON state
When the vehicle speed is below the speed threshold setting, the Switch Power Output will be
activated and indicated by the GREEN light.
Switch Power Output OFF state
When the vehicle speed exceeds the current threshold setting, the Switch Power Output will be
deactivated and indicated by the RED light.
3

Displaying or Programming the Speed Threshold

Note: Please read the below instructions before amending the speed threshold.
3.1

Speed Threshold Table

Note 1: Speed based on four pulses per meter distance.
Note 2: On some Volvo trucks the speed setting may need to be set at half the required speed
e.g. if number 4 is required set to number 2.
Installation Guide 4885
from switch output for connected devices is required.
Number of Light Flashes
1
2
3
4
5 (default factory setting)
6
7
8
9
10
Installation & Operation
Light
Selected Speed Threshold
mph kph
0.6 1
6 10
10 16
12 19
14 23
16 26
18 29
20 32
30 48
60 97
LS-60-A
Guide