JVC XV-S40BK Service Manual page 18

XV-S40BK/XV-S42SL/XV-S45GD
XV-S30BK/XV-E100SL
For Jitter value
The jitter value is displayed on the FL display referring to the previous page.
The jitter value is displayed by the hexadecimal number.
In the following cases, please "Flap adjustment of the pick-up guide shaft" referring to the following page.
Before using the TEST disc VT-501, careful check it if there is neither damage nor dirt on the read surface.
< In the following cases, please adjustment >
* When you exchange the pick-up
* When you exchange the spindle motor
* When the reading accuracy of the signal is bad (There is a block noise in the screen etc..)
3D PHONIC
OPEN STANDBY/ON
/CLOSE
PLAY 3D
Button (Initialize start)
MODE PHONIC CANCEL RETURN
1 2 3
4 5 6
7 8 9
5 Button
10 0 +10
THEATER
ANGLE SUBTITLE AUDIO POSITION
(Laser of DVD)
DIGEST ZOOM
SELECT
4 Button
(Laser of CD)
ENTER
RM-SXVB40A REMOTE CONTROL
1-18
DTS Display part
(Initialize complete)
POWER Button
STANDBY
STANDBY ON
DOLBY
D I G I T A L
OPEN/CLOSE
Button(Test mode)
FL Display
(Test mode & display of jitter)
DVD/CD PLAYER
OPEN/CLOSE
STOP
SKIP
PLAY Button
DVD/VIDEO CD/CD
PLAY PAUSE