Control Panel Operation - Sargent EC200 Manual

Sargent Electrical Services Ltd.

4 CONTROL PANEL OPERATION

4.1 Layout and Buttons
The following diagram shows the control panel layout.
POWER
ON / OFF
PUMP(S)
ON / OFF
Note: to remove the decorative bezel, pull down and lift forward as indicated by the blue arrows.
Item Function
Power ON / OFF Use to turn the main power on and off
Use to select the Leisure or Vehicle battery
Battery SELECT
as the supply source
Use to turn the water pump(s) power on and
Pump ON/ OFF
off (see section 4.3)
Use to turn the Auxiliary power on and off
(see manufacturers handbook for detail of
Aux ON / OFF
what items are operated by the auxiliary
function)
Use to scroll the display up (settings section
?
Scroll UP
of the menu) (see section 4.3)
Use to scroll the display down (readings
?
Scroll DOWN
section of the menu) (see section 4.2)
Use to select a menu item within the
?
Select
settings section (see section 4.2 & 4.3)
Note: the display backlight operated for approximately 6 seconds after any key press.
Issue 03
BATTERY
SELECT
INDICATOR
LAMPS (x4)
AUXILIARY 2x16 LCD
ON / OFF DISPLAY
Page 6 of 11
SCROLL
UP /
ADJUST
SCROLL
DOWN /
ADJUST
Options / Notes
The adjacent LED is illuminated when
the power is ON
The adjacent LED is illuminated when
the VEHICLE battery is selected; by
default the Leisure battery is selected
and is indicated by the battery select
LED off.
The adjacent LED is illuminated when
the pump power is ON
The adjacent LED is illuminated when
the auxiliary power is ON
Note: the menu screens operate in a
continuous loop, therefore you can use
either the UP or DOWN buttons to
move to any screen
Use to move to the next setting, when
entering alarm / event times
Copyright 2005
SELECT
12 May 2005