Assembling Your Tower Fan - dreo DR-HTF007S User Manual

ASSEMBLING
YOUR TOWER FAN
Assembly Instructions
When using the appliance for the first time, remove the wraps and attach the
parts by following the steps below.
1
Slots
Up
Down Pegs
2
Press down on edges to click two
base halves together.
3
Fan
Dreo Tower
2
Keep two base halves in a
crossed position, then insert
pegs on one half onto the
slots on the other half.
3
Run the cord through the center
hole.
4
Fit the base onto the bottom of
the fan by aligning the arrows
on the underside.
6
Thread the cord through the REAR cord
keepers before putting the fan upright.
CAUTION
- Do not operate the tower fan if the base has not been installed.
- Make sure to thread the cord through all rear cord keepers.
5
Rotate the base clockwise to
lock in place.
4
Fan
Dreo Tower