Panasonic ER-GB62 Operating Instructions Manual page 14

4. Wipe off the water with a towel
and let it dry naturally.
• It will dry faster with the blade
removed.
5. Apply the oil to the blade after
drying.
6. Attach the comb attachment
and blade to the trimmer.
Cleaning with the brush
1. Remove the trimmer from the
AC adaptor.
• Make sure that the trimmer is
turned off.
2. Remove the comb attachment.
3. Hold the main body, place your
thumb against the blades and
then push them away from the
main body.
4. Brush off any hair trimmings from the main body
and from around the blade.
14
5. Brush any hair trimmings out
from between the stationary
blade and the moving blade
while pressing down the
cleaning lever to raise the
moving blade.
6. Apply the oil to the blade.
7. Attach the comb attachment and blade to the
trimmer.
Lubrication
• Apply the oil to the blade before and after each use.
1
Remove the blade.
(See this page.)
2
Apply a drop of the oil to
each indicated point.
3
Attach the blade to the main
body, turn on the power and
allow to run for
approximately 5 seconds.