Setting Up The Audio Options - Toshiba SD-6915SU Instruction Manual

Toshiba-SD-6915 fix ok rev01 2004/6/04
Setting Up the Language Features
Using the Disc Menu Language
This function changes the text language only on the
disc menu screens.
1. With the unit in Stop mode, press the SETUP
button.
2. Select Setup using UP/DOWN buttons, then
press the RIGHT or ENTER button.
3. Select Language Setup using UP/DOWN
buttons, then press the RIGHT or ENTER button.
4. Select Disc Menu using UP/DOWN buttons, then
press the RIGHT or ENTER button.
5. Use the UP/DOWN buttons to select the desired
language.
- Select "Others" if the language you want is not listed.
DISC MENU LANGUAGE
Disc Menu
Others
6. Press the ENTER button.
- The language is selected and the screen returns to
LANGUAGE SETUP menu.
07:30am Page 30
Setting Up the Language Features
Using the Audio Language
1. With the unit in Stop mode, press the SETUP
button.
2. Select Setup using UP/DOWN buttons, then
press the RIGHT or ENTER button.
3. Select Language Setup using UP/DOWN
buttons, then press the RIGHT or ENTER button.
4. Select Audio using UP/DOWN buttons, then
press the RIGHT or ENTER button.
5. Use the UP/DOWN buttons to select the desired
language.
- Select "Original" if you want the default soundtrack
language to be the original language the disc is
recorded in.
- Select "Others" if the language you want is not listed.
AUDIO LANGUAGE
Audio
Original
Others
6. Press the ENTER button.
- The language is selected and the screen returns to
LANGUAGE SETUP menu.
ENG-30
Setting Up the Language Features
Using the Subtitle Language
1. With the unit in Stop mode, press the SETUP
button.
2. Select Setup using UP/DOWN buttons, then
press the RIGHT or ENTER button.
3. Select Language Setup using UP/DOWN
buttons, then press the RIGHT or ENTER button.
4. Select Subtitle using UP/DOWN buttons, then
press the RIGHT or ENTER button.
5. Use the UP/DOWN buttons to select the desired
language.
- Select "Automatic" if you want the subtitle language to
be the same as the language selected as the audio
preference.
- Select "Others" if the language you want is not listed.
Some discs may not contain the language you select
as your initial language; in that case the disc will use its
original language setting.
SUBTITLE LANGUAGE
Automatic Automatic
Subtitle
Others
6. Press the ENTER button.
- The language is selected and the screen returns to
LANGUAGE SETUP menu.
Note
• If the selected language is not recorded on the
disc, the original pre-recorded language is
selected.
• How to make the SETUP menu disappear or
return to menu screen during set up;
Press RETURN or LEFT button.
ENG-31

Setting Up the Audio Options

1. With the unit in Stop mode, press the SETUP
button.
2. Select Setup using UP/DOWN buttons, then
press the RIGHT or ENTER button.
3. Select Audio Setup using UP/DOWN buttons,
then press the RIGHT or ENTER button.
4. Use the UP/DOWN buttons to select the desired
item. Then press the RIGHT or ENTER button.
AUDIO SETUP
Digital Output Digital Output : PCM : PCM
DTS : Off
Dynamic Compression : On
PCM Down Sampling : On
Speaker Setup
Digital Output
1. PCM : Converts to PCM(2CH) 48kHz audio. Select
PCM when using the Analog Audio Outputs.
2. Bitstream : Converts to Dolby Digital Bitstream
(5.1CH). Select Bitstream when using the
Digital Audio Output.
Note Even when PCM Down sampling is Off
•
Some discs will only output down sampled
audio through the digital outputs.
•
High sampling rate DVD-Audio discs
(192KHz or 176.4KHz) always output audio
down sampled to 96KHz or 88.2KHz through
the digital outputs.
• When playing LPCM or PPCM DVD
protected by copyright. If digital audio source
is 48KHz/16bit the Digital output is mute.