Wireless Network Connection - Toshiba BDX2500KU Owner's Manual

Wireless Network Connection

Your Blu-ray disc player can also be connected to network with a Wireless access point.
1. A wireless AP/IP router is required to make a wireless network connection. Connect the wireless LAN adapter to the
USB port on the rear panel of the Blu-ray Disc Player, and set the wireless network options (See Step 2 ~ 3).
2. After the Wi-Fi device inserts to USB terminal, press
to select "Wireless", and press OK to enter.
3. Press /
(For detailed information, please refer to the user guide for WLM-10UB1.)
Wired
Wireless
Network Test
Modem Port
Notes:
• This unit is compatible with TOSHIBA's Wireless LAN Adapter only.
Model name: WLM-10UB1
• You must use a wireless IP sharer that supports IEEE 802.11 a/b/g/n. (n is recommended for stable operation of
the wireless network.)
• Wireless LAN, in its nature, may cause interference, depending on the use condition (AP performance, distance,
obstacle, interference by other radio devices, etc.).
• Set the wireless IP sharer to Infrastructure mode. Ad-hoc mode is not supported.
• When applying the security key for the AP (wireless IP sharer), only the following is supported.
1) Authentication Mode : WEP, WPAPSK, WPA2PSK
2) Encryption Type : WEP, TKIP, AES
(Need the opTIoNAl Wi-Fi unit of sold separately)
/ to select "Network" from Settings, and press OK to enter.
AC IN
lAN
Wireless access point
Modem Cable
COMPONENT VIDEO OUT
SBl C Sl Fl
Y P P
B R
SBR SW SR FR
R l
BITSTREAM / PCM
VIDEO
USB HDMI OUT OPTICAl AUDIO OUT MUlTI CHANNEl AUDIO OUTPUT
OUT
USB
Wireless LAN
Adapter
15