General Pipe Cleaners Speedrooter 92R Operating Instructions Manual
  1. Manuals
  2. Brands
  3. General Pipe Cleaners Manuals
  4. Pipe cleaners
  5. Speedrooter 92R
  6. Operating instructions manual

General Pipe Cleaners Speedrooter 92R Operating Instructions Manual

Hide thumbs Also See for Speedrooter 92R:
Table of Contents

Advertisement

Quick Links

Download this manual
Your Speedrooter 92R is designed to
give you years of trouble-free, profitable
service. However, no machine is better
than its operator.
Read, understand and follow all safe-
ty warnings and instructions provided
with the product. Failure to follow the
warnings and instructions may result in
electric shock and/or serious injury.
Save all warnings and instructions for
future reference.
SAVE THESE INSTRUCTIONS!
Speedrooter 92R
Operating Instructions
For 3" through 10"
(75mm—250mm)
®

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Speedrooter 92R and is the answer not in the manual?

Questions and answers

Related Manuals for General Pipe Cleaners Speedrooter 92R

Summary of Contents for General Pipe Cleaners Speedrooter 92R

  • Page 1 ® Speedrooter 92R Operating Instructions For 3” through 10” (75mm—250mm) Your Speedrooter 92R is designed to give you years of trouble-free, profitable service. However, no machine is better than its operator. Read, understand and follow all safe- ty warnings and instructions provided with the product.

  • Page 2: General Safety Rules

    These instructions are intended to items could become wrapped around the cable and cause seri- familiarize all personnel with the safe ous injury. operation and maintenance procedures for the Speedrooter 92R. Always wear safety glasses rubber soled, non-slip shoes. Use of this safety equip- This is the safety alert symbol.

  • Page 3: General Power Tool Safety Warnings

    ® Speedrooter 92R GENERAL POWER TOOL SAFETY WARNINGS* 3. Prevent unintentional starting. Ensure the switch is in the off- position before connecting to power source and/or BATTERY WARNING pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energizing power tools that have the Read all safety warnings, instructions, illustrations and specifica- switch on invites accidents.

  • Page 4: Specific Safety Information

    ® Speedrooter 92R Specific Safety Information for Speedrooter 92R Service 1. Only wear leather gloves. Never use any other type of glove, 1. Have your power tool serviced by a qualified repair person such as cloth, rubber, or coated gloves. Never grasp a rotating using only identical replacement parts.

  • Page 5: Ground Fault Circuit Interrupter (Gfci)

    ® Speedrooter 92R Ground Fault Circuit Interrupter (GFCI) Cable Application Chart (Table 1) Your machine is equipped with a ground fault circuit interrupter, which protects you against shock if a short circuit should occur. Check that Cable Size Pipe Size Typical Applications receptacle is properly grounded.

  • Page 6: Operation

    ® Speedrooter 92R OPERATION INSTALLING THE GUIDE TUBE HOLDER SET-UP To install the Guide Tube Holder on The Metro, follow the as- sembly shown in the diagram below. Place the Guide Tube Hold- MAKE SURE THE MOTOR SWITCH IS IN er on the mounting knob, then thread it onto the bolt to secure THE ‘OFF’...
  • Page 7 ® Speedrooter 92R OPERATION Hint: It's often helpful to have a small stream of water running in Before stepping on the foot pedal, place the guide tube and cable the line to wash the cuttings away while the machine is in operation into the drain opening.

  • Page 8: Special Operations

    ® Speedrooter 92R HOW TO REMOVE DRUM SPECIAL OPERATIONS DISCONNECT MACHINE FROM POWER SOURCE BEFORE REMOVING DRUM FROM MACHINE! IF CABLE GETS CAUGHT IN LINE The motor can be reversed for a few seconds at a time to free the Remove belt guard by loosening the knob above the motor and cable if it gets caught in line.

  • Page 9: Maintenance

    ® Speedrooter 92R MAINTENANCE Slide the V-Belt (62”) over the drum and hang it from the slip clutch. Push down on the motor enough to slide the V-Belt onto the drum. DISCONNECT MACHINE FROM POWER SOURCE Pull about 12” of cable out beyond the front post.
  • Page 10 ® Speedrooter 92R DAMAGED ROLLER TANGLED CABLE If a cable loops over itself in the drum, it will not feed properly. Re- Excessive use may wear a roller to the point of failure. It is recom- move and reload the cable to restore function. If the cable kinks, it is...
  • Page 11 ® Speedrooter 92R TROUBLE SHOOTING GUIDE (Table 3) Problem Probable Cause Solution Cable kinks or breaks. Operator forcing the cable. Do not force the cable. Let the cutter do the work. Too much slack between machine and Allow no more than two feet between machine and drain.
  • Page 12 ® Speedrooter 92R General Wire Spring Co. 1101 Thompson Avenue McKees Rocks, PA 15136 412-771-6300 www.drainbrain.com © General Wire Spring Co. 2022 C-92ROI-0422...

Table of Contents