Table of Contents
Advertisement
What's in this user guide?
Getting started
Connecting the camera
Making your own cables
Remote control
Contact information
User Guide
TANDBERG PrecisionHD 1080p
Camera
Thank you for choosing TANDBERG!
Your TANDBERG PrecisionHD 1080p Camera
has been designed to give you many years of
safe, reliable operation.
This user guide has been divided into several
chapters, all of which provide different
information. You can access the chapters
directly by clicking on the menu bar at the top
of this page.
You will find that some places information
has been copied from other chapters (but
adapted, when needed) to let you have all
the relevant information there and then. This
helps eliminating the need to read through long
sections before you can even think of getting
started.
Our main objective with this user guide was to
address your goals and needs. Please let us
know how well we succeeded!
www.tandberg.com
D14245.04—DECEMBER 2008
1
Advertisement
Table of Contents
Related Manuals for TANDBERG PrecisionHD 1080p
Summary of Contents for TANDBERG PrecisionHD 1080p
-
Page 1: User Guide
User Guide TANDBERG PrecisionHD 1080p Camera Thank you for choosing TANDBERG! Your TANDBERG PrecisionHD 1080p Camera has been designed to give you many years of safe, reliable operation. This user guide has been divided into several chapters, all of which provide different information. -
Page 2: Table Of Contents
User Guide Remote control Contact information INTELLECTUAL PROPERTY RIGHTS The TANDBERG PrecisionHD 1080p camera covered by this User Guide is protected under copyright, patent, and other intellectual property rights of various jurisdictions. Copyright © TANDBERG 2008. All rights reserved. This User Guide may be reproduced in its entirety, including all copyright and intellectual property notices, in limited quantities in connection with the use of the Product. -
Page 3: Getting Started
PrecisionHD 1080p Camera User Guide What’s in this user guide? Getting started Connecting the camera Making your own cables Remote control Contact information Chapter 2 Getting started www.tandberg.com D14245.04—DECEMBER 2008... -
Page 4: The Camera At A Glance
& power on the camera to the Camera port on the codec. When the camera is used with TANDBERG codecs power will be supplied through Camera Control cable. When used with non-TANDBERG codecs, you may have to connect power separately. HDMI and HD-SDI •... -
Page 5: Best View (Face Recognition)
Best view (face recognition) This camera is capable of face recognition when used with TANDBERG C90 Codecs. Observe that the feature is still a preview feature. Consequently, the functionality is subject to change without further notice in order to take advantage of further developments. -
Page 6: Connecting The Camera
PrecisionHD 1080p Camera User Guide What’s in this user guide? Getting started Connecting the camera Making your own cables Remote control Contact information Chapter 3 Connecting the camera www.tandberg.com D14245.04—DECEMBER 2008... -
Page 7: Connecting The Camera
Connect HDMI HD Video out on camera to HDMI Main Camera In on the Codec. If you need to connect the camera to a TANDBERG Video Switch or to a system with a DVI-D socket, use the enclosed HDMI to DVI-D adapter. -
Page 8: Dip Switch Settings For Video Output Formats
What’s in this user guide? Getting started Video output formats This section describes the video output formats for the TANDBERG PrecisionHD 1080p camera. DIP switch settings for video output formats The video output format for the camera is set by DIP switches. The DIP switches are found on the bottom side of the camera. -
Page 9: Cameras In Daisy Chain
PrecisionHD 1080p Camera What’s in this user guide? Getting started Cameras in daisy chain A single daisy chain can have up to seven cameras. Cascaded cameras The sockets named Extra Camera and Power In are used when connecting cameras in daisy chain. -
Page 10: Making Your Own Cables
PrecisionHD 1080p Camera User Guide What’s in this user guide? Getting started Connecting the camera Making your own cables Remote control Contact information Chapter 4 Making your own cables www.tandberg.com D14245.04—DECEMBER 2008... -
Page 11: Making Your Own Cables
PrecisionHD 1080p Camera What’s in this user guide? Getting started Making your own cables If you need to assemble your own cables, the tables to the right show the pin-out required. D14245.04—DECEMBER 2008 Connecting the camera Making your own cables Pin-out—TANDBERG camera cable... -
Page 12: Controlling Cameras From Remote
PrecisionHD 1080p Camera User Guide What’s in this user guide? Getting started Connecting the camera Making your own cables Remote control Contact information Chapter 5 Controlling cameras from remote www.tandberg.com D14245.04—DECEMBER 2008... -
Page 13: Interfacing To The Camera Using The Visca Protocol
What’s in this user guide? Getting started Interfacing to the camera using The RS232 Message format the VISCA protocol The TANDBERG PrecisionHD 1080p camera uses an RS-232 control interface that resembles the Sony VISCA™ protocol. RS232 Parameters At startup, the communication parameters for the RS232 interface must be set to: •... -
Page 14: Network And Interface Commands
PrecisionHD 1080p Camera What’s in this user guide? Getting started Network and interface commands Command Set Command Packet IF_Clear 8x 01 00 01 ff Address_Set 8x 30 0p ff Command_Cancel 8x 2p ff D14245.04—DECEMBER 2008 Connecting the camera Making your own cables Push messages Messages sent from camera to controller. -
Page 15: Camera Commands
PrecisionHD 1080p Camera What’s in this user guide? Getting started Camera commands Command Command Packet Power_On 8x 01 04 00 02 ff Power_Off 8x 01 04 00 03 ff Video_Format 8x 01 35 0p 0q 0r ff WB_Auto 8x 01 04 35 00 FF... - Page 16 PrecisionHD 1080p Camera What’s in this user guide? Getting started PTZF - movement commands Command Command Packet Zoom_Stop 8x 01 04 07 00 ff Zoom_Tele 8x 01 04 07 2p ff Zoom_Wide 8x 01 04 07 3p ff Zoom_Direct 8x 01 04 47 0p 0q 0r 0s ff...
- Page 17 PrecisionHD 1080p Camera What’s in this user guide? Getting started Inquiries Command Command Packet CAM_ID_Inq 8x 09 04 22 ff CAM_SWID_Inq 8x 09 04 23 ff CAM_HWID_Inq 8x 09 04 24 ff Zoom_Pos_Inq 8x 09 04 47 ff Focus_Pos_Inq 8x 09 04 48 ff...
-
Page 18: Software Upload Commands
PrecisionHD 1080p Camera What’s in this user guide? Getting started Software upload commands The CRC algorithm used is the same as in the XModem protocol. CRC for last data packet is only calculated for the actual data bytes in the packet. Pad last packet with 0x00 so that the data section is 256 bytes long. -
Page 19: Video Mode Selection
PrecisionHD 1080p Camera What’s in this user guide? Getting started Video mode selection Method The DIP switch selection has priority over the selection made by the CAM_Video_Format command. If the DIP switch is set to auto, the CAM_Video_Format setting will be used. If both are set to auto, resolution will be controlled automatically by EDID. - Page 20 E-mail: tandberg@tandberg.com Copyright © TANDBERG 2008. All rights reserved. This document contains information that is proprietary to TANDBERG. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form, or by any means, electronically, mechanically, by photocopying, or otherwise, without the prior written permission of TANDBERG.
Need help?
Do you have a question about the PrecisionHD 1080p and is the answer not in the manual?
Questions and answers