Husqvarna BMC 335 Operator's Manual page 21

2. Disengage the drive system.
3. Push down on the handles and the foot support to tilt
the product.
4. Lower the product carefully. The front is very heavy.
1816 - 001 - 05.04.2022
5. Install the steering lock again.
To do maintenance on the remote
control
WARNING:
from the remote control manufacturer
for all safety, servicing and maintenance
information.
• Do these procedures daily:
a) Do a visual inspection of the rubber seals around
the controls.
b) Examine the switches and controls for damages.
c) Do a visual inspection of the remote control for
cracks and other damages.
d) Do a visual inspection of the remote control
harness.
e) Make sure that the battery lock operates
correctly.
f) Make sure that the manual stop button is easy to
move and not damaged.
g) Make sure that the LED indicators quickly flash 1
time when the remote control is set to ON.
h) Tilt the remote control 90 degrees to do a check
of the tilt function.
i) Remove dust from the remote control with air.
• Do these procedures weekly:
a) Clean the battery terminals and the terminals in
the battery compartment and the battery charger.
Use a soft and dry cloth.
b) Clean the control panel of the remote control and
make sure that you can clearly read the print.
• If there are any damages or the remote control does
not operate correctly, speak to an approved service
agent.
• Let an approved service agent do a yearly servicing
of the remote control.
Read the instructions
21