Plug & Play (Initial Setup) - Samsung 6 Series User Manual

When you turn the TV on for the first time, a sequence of on-screen prompts will assist in configuring basic
settings. To turn on the TV, press the POWERP button.
✎
Plug & Play is available only when the Source is set to TV.
✎
Before turning on the TV, make you have connected the TV to an antenna or cable connection (p. 7).
1
Selecting the OSD
Language
2
Setting the Network
3
Software Upgrade
4
Selecting the usage
mode
5
Setting the Clock
Mode
6
Selecting search
options for auto tuning
7
Selecting and
memorizing channels
8
Enjoy your TV.
If You Want to Rerun Plug & Play...
O
→ System → Plug & Play → ENTERE
MENU
✎
NOTE
• To change the TV's setting from Store Demo to Home Use when not in Plug & Play, press the volume
button on the TV. When you see the volume in the OSD, press and hold
Select System - Plug & Play (Initial Setup). Enter your 4 digit PIN number. The default PIN number is "0-0-0-
•
0." If you want to change the PIN number, use the Change PIN function.
Plug & Play (Initial Setup)
Press the ▲ or ▼ button to select a language. Press ENTERE
twice when done.
Set up your network connection. Press the ENTERE button to
start. If you do not know your network set up information or want to
set to it later, select Skip. We suggest you skip network connection
setup now and refer to "Network menu" in the e-Manual for set up
requirements and instructions, and the Network Connection section
of this manual(Page 13).
You can set up the network connection later using the Network
menu.
When network connection settings are complete, Software Upgrade is available.
Select Next to upgrade TV software. Your TV will automatically upgrade, if your
TV need a software upgrade. If you want to upgrade later, select the Skip. For
more information, refer to "Software Upgrade" (Preference Features → Support
Menu) in the e-Manual.
✎
This may take some time, depending on network status.
Press the ▲ or ▼ button to select Home Use, and then press the ENTERE
button twice.
• Select the Home Use mode. Store Demo mode is for retail environments.
Set the Clock Mode automatically or manually.
• Auto: Set the Clock Mode automatically.
• Manual: Allows you to manually set the current date and time.
Press the ▲ or ▼ button to select Air or Cable, and then press ENTERE. A
check appears on your selection. Select Next, and then press the ENTERE
button. You can check both if you have both connected.
The channel search will start automatically. This can take up to 30 minutes.
For more information, refer to Channel → Auto Program in the e-Manual.
✎
Press the ENTERE button at any time to interrupt the memorization
process.
If you want to watch a broadcast program, select Close.
If you want to enjoy Smart Hub, select Smart Hub. Smart Hub will start. For
more detailed information, refer to "Smart Hub" in the e-Manual.
English - 8
P
MENU for 5 sec.
POWER