Table of Contents
Advertisement
Cleaning and care
NoSmell active charcoal filters
With recirculation mode, two charcoal
filters must be fitted in addition to the
grease filters. These are designed to
absorb cooking odours.
Charcoal filters are available to order via
the Miele online shop (see the end of
this booklet for contact details) or
directly from Miele.
The part number of the charcoal filter
required is listed under "Technical data".
Fitting/Replacing the charcoal filters
The slots for the charcoal filters are
located above the grease filters.
Take the lid off. It is held in place by
magnets.
Take the charcoal filters out of their
packaging.
Insert the charcoal filters in the slots
as far as they will go.
Refit the lid.
When to change the NoSmell active
charcoal filters
Replace the charcoal filters when they
no longer absorb kitchen odours
effectively, or at least every 6 months.
36
The operating hours counter will remind
you to replace the charcoal filters by
lighting up the charcoal filter symbol .
Resetting the charcoal filter
operating hours counter
After changing the charcoal filters, the
operating hours counter needs to be
reset.
Touch the charcoal filter control for
approx. 3 seconds with the
rangehood switched on until only the
indicator light for level 1 is flashing.
The charcoal filter symbol goes out.
Disposing of the charcoal filters
Used charcoal filters can be disposed
of with the normal household waste.
Advertisement
Table of Contents
