Varia Rct716 Device Status Led; Varia Rct716 Camera Status Led; Tail Light Modes And Intensity; Turning Off The Device - Garmin VARIA RCT716 Owner's Manual

Varia RCT716 Device Status LED

LED State
Purple
Blue
Flashing green
Solid green
Flashing yellow
Flashing red
Solid red

Varia RCT716 Camera Status LED

LED State
Solid red
Flashing red
Alternating red and yellow flashes The memory card is low on space.
Flashing yellow
Solid green
Flashing green
Flashing blue

Tail Light Modes and Intensity

You can switch the Varia RCT716 tail light modes by pressing the device button
Mode
Solid (default)
Standby

Turning Off the Device

Hold the device button for 2 seconds
NOTE: You can also hold both buttons for 4 seconds to lock the device, preventing it from turning on.
Introduction
Status
The device is in active pairing mode.
The device is in smart mode and can be controlled by a paired compatible
Garmin device.
The device is charging.
The device is fully charged.
The device is in lock mode.
The device has approximately 60 or fewer minutes of battery life
remaining.
NOTE: You must charge the device as soon as possible.
An error occurred. You may need to restart the device.
Status
The device is recording video.
The device is saving a video or photo.
There is a problem with the memory card.
The memory card is being formatted.
The device is in mass storage mode.
The device is powering on.
The memory card is being accessed.
The device is in Wi‑Fi sharing mode.
®
Light Intensity
High
Off
(Device Overview, page
(Device Overview, page
Radar Behavior when Vehicle
Approaches
The device detects vehicles.
The device does not detect
vehicles.
4).
4).
5