Table of Contents
Advertisement
To re-configure the device, first delete it
in the device management section of the
Bosch Smart Home app and then add it
again in the usual configuring process.
The module settings, whether it is used for
shading or for light, are deleted after the
module is reset to factory settings. The
desired use of the module is only possible
after reconfiguring it via the app. If this
is not done, no movement or switching
commands are issued via the switches
connected via S1/S2.
Maintenance and cleaning
The device does not require maintenance. Leave
any repairs to a specialist.
Simplified declaration of conformity
Robert Bosch Smart Home GmbH hereby
declare that the radio equipment type
Bosch Smart Home BMCT-SLZ corresponds with
the directive 2014/53/EU. The complete text of
the EU declaration of conformity is available via
the following web address:
https://eu-doc.bosch.com
Robert Bosch Smart Home GmbH hereby
declares that the radio system type BMCT-
SLZ complies with Regulation 2017. The
full text of the declaration of conformity is available
at the following internet address:
https://gb-doc.bosch.com
Advertisement
Table of Contents
