Related Manuals for elero Revio-868
Summary of Contents for elero Revio-868
- Page 1 Revio-868 No. 28 400 0006 Operating instructions (translation) ÊN Keep the operating instructions in a safe place! 181005006_EN_0115...
-
Page 2: Table Of Contents
Approaching positions ..........12 between L and PU or Deleting positions/deleting transmitters ......12 between L and JA Technical data ................13 Disposal ..................13 Notes on troubleshooting ............13 EU Declaration of Conformity ..........14 2 | EN EN | 3 Ⓒ elero GmbH Ⓒ elero GmbH... -
Page 3: Safety Instructions
It is essential to observe these operating instructions for use if • The device may only be used by persons who have the Revio-868/-915 is to be used safely and if the various prod- read and understood the operating instructions. -
Page 4: Scope Of Supply
General information • Please note that radio systems must not be operated The Revio-868/-915 is a flush-mounted radio receiver. It is suitable in areas with an increased risk of interference (e.g. for the operation of 230 V drives for roller shutters, awnings and hospitals, airports, ...). -
Page 5: Installation/Connection
The flush-mounted housing hast to be fixed so that the drill hole does not touch any electrical lines. Connection Interlocked push button You can find the structure of a controller on elero.com in the down- load area under "Installation instructions and circuit diagrams". Mains Venetian blind drive connection... -
Page 6: Optimal Use Of The Radio Signal
Senses of rotation - device outputs If the Revio-868/-915 is used to control a drive, a movement is After connecting the drive, check the senses of rotation compared started by pressing a button for a longer time (at least 1.8 s). The to the device outputs. -
Page 7: Programming The Transmitter/Channel
≤ 500 mW 1. After restoration of power or by pressing the P button Type of installation Flush-mounted housing, Ø 58 mm, depth 60 (at least 5 s), the Revio-868/-915 is in programming mode for mm. Corresponding surface-mounted housing 5 minutes. Dimensions L 50 x W 48 x H 27 mm 2. -
Page 8: Eu Declaration Of Conformity
EU Declaration of Conformity Declaration of conformity elero GmbH hereby declares that the radio system type Revio- 868 is in compliance with directive 2014/53/EU. The complete text of the EU declaration of conformity is available at the follo - wing adress: www.elero.com/downloads/... - Page 9 GmbH Antriebstechnik Maybachstr. 30 73278 Schlierbach info@elero.de We reserve the right to make technical changes. www.elero.com 309 306...
Need help?
Do you have a question about the Revio-868 and is the answer not in the manual?
Questions and answers