Advertisement
Available languages
Available languages
1. Update to the latest software on your TV. Navigate to Support > Software Update > Update now .
2. Back up your data by navigating to System > UHD Evolution Kit Backup , and then select Start .
–
Some data or apps installed on the TV may not be backed up. In this case, install a UHD Evolution Kit, and then reconfigure those
data or reinstall those apps.
3. A pop-up window appears. Confirm whether or not you have any recorded programmes by connecting the recording USB device to
the USB HDD 5V 1A slot, select Yes . If you do not have recorded programmes, select No and go to step 5.
–
If you view recorded programmes on a TV with a newly installed UHD Evolution Kit, it is necessary to convert the programme.
–
Conversion of recorded programme is also available after installing UHD Evolution Kit by Navigating to System > Update Recorded
.
Programmes
–
Availability depends on the specific model and area.
4. Convert your recorded programmes following the directions on the screen.
–
Availability depends on the specific model and area.
5. After completing the backup and conversion, select Done .
6. After turning off the TV, disconnect its power plug.
7. Connect a UHD Evolution Kit to the TV. Make sure to connect the end of the UHD Evolution Kit cable marked TV to the TV and the
other end to the Kit.
–
If you have the existing One Connect or UHD Evolution Kit, disconnect it and connect a new UHD Evolution Kit to the TV.
–
When converting recorded programmes, make sure to connect a recording USB device to the UHD Evolution Kit.
–
Availability depends on the specific model and area.
–
When connecting the UHD Evolution Kit, make sure to use the provided UHD Evolution Kit cable.
8. Reconnect the power plug, turn on the TV, and then follow the directions on the screen to complete the installation of the UHD
Evolution Kit.
–
Store your old One Connect in a safe place. Do not discard it.
English - 4
Advertisement
