Component Description; Overview; Detailed Component Description - cmotion CZOOM II User Manual

2
2.1
Fig. 2. 1
Fig. 2. 2
Chapter 2 – Component Description

COMPONENT DESCRIPTION

Overview

czoom II (Fig. 2. 1)
The czoom II prov ides all operational functions
necessary to control a zoom motor. It comes with an
integrated display which shows the current motor
position as well as other relevant status information.
The czoom II can be attached to the pan bar and
offers direct control of both zoom motor and camera.
czoom II-e xt (F ig. 2. 2)
The czoom II-ext provides a built-in radio-remote
module, an internal antenna and a battery receptacle.
This extension enables you to use the czoom II in
wireless mode together with a camin or camin mono.
A czoom II with a radio-remote module has a
„wireless extension" label on its rear side.
07-07
[Z5]
[Z6]
[Z7]
Fig. 2. 3
5/ 35 Chapter 2 – Component Description
2.2

Detailed Component Description

Off czoom II has no power
Green System is ready
[Z1]
Red/
RDY LED
Z1
[Z2] Green No motor connected
blinking
Error has occurred (e.g. another unit is
[Z4]
Red in control of the motor. System is not
ready)
[Z3]
Z2/ UP / DOWN • Zoom Speed selection
[Z9]
Z3 button • Menu selection
[Z8]
Z4 MENU button Access menu
Z5 Display Shows motor position and status information
[Z10]
Replaceable
Z6 Marker strip
positions
RECALL
Z7 Stored motor positions can be retreived
button
Z8 RUN button Starts / stops a camera
•
Off
•
RUN LED
Z9
Green Camera is running
•
Red
•
Zoom control Force-sensitive joystick for controlling the zoom
Z10
joystick motor
07-07
marker strip for marking motor
No RUN signal received from camera
or
Camera is in standby mode
Camera error
or
Camera is running up/down
6/ 35