1. Communication Parameters Baud Rate 9600 Character length 8 bits Parity none Stop bit length 1 bits Flow Control none 2. Pin Assignment Monitor side : D-sub 9pin (Female) Pin number Function ( S t r a i g h t c o n n e c t i on is necessary) Host side : D-sub 9pin (male) Pin number Function...
6. User Reset Syntax Header Category Control 0x8C 0x50 Execute Judge 0x89 Answer Header Answer Control 0x70 0x00 0x70 0x03 Execute Judge 0x70 0x03 0x70 0x04 Code Table (6) Function 0x00 Picture Reset 0x01 Audio Reset 0x02 Size Reset 0x03 PLL Reset Function Data1...
Page 20
7. Answer (a) Normal message Answer Header 0x70 Normal answer header Category 0xXX Code table (7-a): Normal code Code table (7-a) Normal code 0x00 Completed Normal response. 0x01 Limit over The packet was received normally, but the data value was over the upper limit. Forcedly the monitor adjusted the data to maximum value.
Need help?
Do you have a question about the PFM-42V1 and is the answer not in the manual?
Questions and answers