IMPORTANT SAFETY INSTRUCTIONS 1. Read Instructions – All the safety and operating instructions should be read before this product is operated. – 2. Retain Instructions The safety and operating instructions should be retained for future reference. – 3. Heed Warnings All warnings on the appliance and in the operating instructions should be adhered to.
Page 3
IMPORTANT SAFETY INSTRUCTIONS 21. Lightning – For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning and power-line surges.
Note: Key lock and digital output processing is only available when the LINE output is used. 20) DIGITAL OUT Use this output to connect your STR8-150 to any SPDIF in equipped digital device such as a CD-R or Computer. 21) POWER CORD CONNECTOR...
SPECIFICATIONS TURNTABLE SECTION Starting Torque: More than 4.5kgf.com Motor: 16pole, 3phase, brushless DC motor Platter: 332mm dia. Aluminum diecast Pitch: +/-8%,+/-25%,+/-50% Brake: Electronic TONE ARM SECTION Tone arm type Static balanced straight shaped tone arm with cardanís suspension Effective Arm Length 194mm Tracking Force Adjust Range 0-3g...
Any returns to a non-authorized dealer or to an authorized Stanton dealer not in the same country as the merchandise was intended to be sold or as set forth above will void this warranty.
Page 7
Ground lift Operation Due to the variety of power sources available to the DJ, Stanton has included a ground lift switch to be used on the ST- 150/STR8-150 turntables. This will allow the DJ to have the capability of changing the grounding scheme of the phono cartridge to avoid ground hum that may occur when using the turntable.
Need help?
Do you have a question about the STR8-150 and is the answer not in the manual?
Questions and answers