Notes For Installation - Hitachi R410A Series Installation And Operation Manual

Structure mechanism and Installation
•

Notes for installation

Removal
Before removing air conditioner to the other place, you
should contact the seller firstly.
Then it must be done under the direction of the
professional technician.
Noise
•
Install in a location where is firm enough to avoid the
enlargement of noise and vibration.
•
Don't put anything in front of the outlet of the unit to
avoid enlarging noise.
•
Be sure that hot air or noise will not cause
inconvenience to neighbors.
•
Please contact the seller as soon as there is strange
noise during operation. Please use the safety support.
Electric Wiring
•
Must connect with ground reliably.
•
The exclusive circuit must be used. Removable
socket can't be used because of poor contact. It
can cause overheat or fire.
•
Don't pull the power cord strongly.
•
In fixed circuit, there must be electricity leakage
protection switch and leakage current is less than
30 mA.
•
Switch (circuit breaker) should be installed in the
circuit and its capacity are 15 A (RAW-VJ07SCASK,
RAW-VJ10SCASK and RAW-VJ13SCASK), and 30 A
(RAW-VJ18SCASK and RAW-VJ24SCASK)
8 -
-