ASDA tech ATA22AA004A Product Manual page 3

Bluetooth
Pairing a Bluetooth Device for the
First Time
1. Slide the Source Switch to Bluetooth Mode.
The letters "bt"will flash on the display.
2. If the unit does not automatically begin to
pair, press and hold the Pair button.
3. Using the native controls on your
Bluetooth device, select the Boombox in
your Bluetooth settings to pair.
4. When pairing, remain within 3 feet of the
unit if your device requests a password,
enter the default password 0 0 0 0. Refer
to the user's manual for your specific
device for instructions on pairing and
connecting Bluetooth devices. When
successfully paired, the display will stop
flashing.
5. After initial pairing, the unit will stay paired
unless unpaired manually by the user or
erased due to a reset of the device.
6. If your device should become unpaired,
follow the above steps again.
7. If any pairing issues should occur, unpair
the unit on your Bluetooth device and
follow the above steps again.
Playing Audio Wirelessly
1. To select, play, pause or skip a track, use
the native controls on the connected
Bluetooth Device, or press the Pair/Play/
Pause or Tun/Skip/Search buttons.
2. Audio played through the connected
Bluetooth device will now be heard through
the speakers.
Radio
Radio Reception
An FM wire antenna is built into the radio. To
improve radio reception, adjust the FM wire
antenna on the boombox.
Playing the Radio
1. Slide the Source Switch to FM radio mode.
2. Adjust the Tuning dial to tune the radio.
Hereby, [Huizhou Yinghai Digital Electronics Co., Ltd.], declares that this
[Bluetooth CD Boombox ATA22AA004A] is in compliance with the essential
requirements and other relevant provisions of 2014/53/EU.
The full text of the EU declaration of conformity is available at the following
internet address: www.asda.com
This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means
that this product must be handled pursuant to European directive 2012/19/EU in order to recycled or dismantled
to minimize its impact on the environment. User has the choice to give his product to a competent recycling
organization or to the retailer when he buys a new electrical or electronic equipment.
For more information, please contact the local authority or your retailer where you purchased the product.
ASDA, Leeds LS11 5AD/ASDA, Antrim BT41 4GY
Site: 5A.06.20.113
CD
Loading and Playing a CD
Note: This unit is not compatible with MP3 CDs.
1. Open the CD door and place a CD in the
boombox, label side facing up.
2. Close the CD door.
3. Slide the Source Switch to CD mode.
4. Press the Play/Pause button to begin
playing the loaded disc.
Programming a CD
1. Press the Stop button to stop a loaded CD.
2. Press the Program button.
"01" will blink on the display.
3. Press the Skip/Search buttons to select a
track.
4. Press the Program button to add the
selected track to the program.
5. Repeat steps 4 and 5 to program up to 20
tracks to play in a specified order.
6. Press the Stop button to cancel a program.
3.5mm Audio Input
Using the Line In
3.5 mm audio input cable (not included).
1. Plug one end of a 3.5mm audio input cable
into the Line In input on the side of the unit,
and plug the other end of the cable into
the audio output/headphone jack on an
MP3 Player or other audio Source.
2. Turn ON the speaker using the Power
button.
3. Turn ON the connected audio device using
it's Power button.
4. Slide the Source Switch to Line In.
5. Select and begin playing audio on the
connected audio device. Audio played
through the connected device should now
be heard through the speakers.
Only suitable for use in indoors
To refer to text in an accompanying document.
Where the plug of the Direct Plug-in Adapter is used
as the disconnect device, the disconnect device shall
remain readily operable.