Side Repeater Lamp Unit - Remove And Install And Replace Bulb; Side Marker Unit Bulb; Side Marker Unit - Aston Martin DB9 Workshop Manual

Front Lights (17.01)
Lighting (17.00)
Side Repeater Lamp Unit - Remove and
Install and Replace Bulb
Repair Operation Time (ROT)
Item
Side Repeater Lamp Unit - Remove and
Install
Side Repeater Lamp Unit - Replace Bulb
Remove
1. Raise the vehicle and make it safe.
2. Remove the two M6 Torx head screws that attach the
wheelarch liner at the middle of the wheelarch.
3. Move the wheelarch liner to get access to the repeater
lamp assembly.
4. Protect the adjacent paint work.
5. Hold the side repeater body and turn the bulb holder
assembly counterclockwise and pull it out of the body.
BE CAREFUL WHEN YOU INSTALL AND REMOVE THE
BULB. THE GLASS OF THE BULB CAN BREAK AND
CAUSE INJURY.
6. Pull the bulb to release it from the bulb holder.
Install
BE CAREFUL WHEN YOU INSTALL AND REMOVE THE
BULB. THE GLASS OF THE BULB CAN BREAK AND
CAUSE INJURY.
1. Push the bulb into the bulb holder.
2. Align the bulb holder assembly with the side repeater
body.
3. Push the bulb holder assemby into the side repeater
body and turn it clockwise to lock it.
4. Put the wheelarch liner back into position.
17-1-6
WARNING
WARNING
5. Install the two M6 Torx head screws that attach the
wheelarch liner.
6. Lower the vehicle.

Side Marker Unit Bulb

Code
17.01.KC
Repair Operation Time (ROT)
Item
17.01.KD
Side Marker Unit Bulb Renew
Federal Markets Only
Renewal (Front and Rear)
1. Front Side Marker Unit Only.
Remove the front part of the road wheel arch liner to
gain access to the bulb holder.
2. Rear Side Marker Unit Only.
Remove the rear light cluster to gain access to the bulb
holder (Refer to 'Light Cluster', page 17-3-1).
3. Twist the bulb holder for the side marker unit 90°
counterclockwise and pull it out of the side marker unit.
4. Install a new bulb into the bulb holder.
5. Put the bulb holder into the side marker unit.
6. Turn it 90° clockwise to it lock in place.
7. Front Side Marker Unit Only.
Install the road wheel arch liner.
8. Rear Side Marker Unit Only.
Install the rear light cluster (Refer to 'Light Cluster', page
17-3-1).

Side Marker Unit

Repair Operation Time (ROT)
Item
Side Marker Unit Renew
Federal Markets Only
Renewal (Front and Rear)
1. Front Side Marker Unit Only.
Remove part of the road wheel arch liner to gain access
to the rear of the side marker unit.
2. Rear Side Marker Unit Only.
Remove the rear bumper to gain access to the rear of
the side marker unit (Refer to 'Rear Bumper', page 1-
19-3).
3. Remove the two speed nuts that attach the side marker
unit to the bumper.
4. Remove the side marker unit.
Workshop Manual
Code
TBA
Code
17.01.LA
Issue 4, November 2008