Peloton BIKE Assembly Manual
  1. Manuals
  2. Brands
  3. Peloton Manuals
  4. Exercise Bike
  5. BIKE
  6. Assembly manual

Peloton BIKE Assembly Manual

Hide thumbs Also See for BIKE:
Table of Contents

Advertisement

Quick Links

PELOTON BIKE
ASSEMBLY GUIDE

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the BIKE and is the answer not in the manual?

Questions and answers

Related Manuals for Peloton BIKE

Summary of Contents for Peloton BIKE

  • Page 1 PELOTON BIKE ASSEMBLY GUIDE...

  • Page 3: Table Of Contents

    CONTENTS Assembled Peloton Bike Photo Exploded Drawing Parts List Hardware Kit Assembly A. Front/Rear Stabilizer B. Pedal C. Handlebar Assembly D. Check Seat E. Weight Holder F. Adjust Leveling Feet G. Plug In Power Equipment H. Finished Bike Diagram...

  • Page 4: Assembled Peloton Bike Photo

    ASSEMBLED PELOTON BIKE PHOTO...

  • Page 5: Exploded Drawing

    EXPLODED DRAWING...

  • Page 6: Parts List

    PARTS LIST DESCRIPTION PICTURE Frame Front Stabilizer Rear Stabilizer Handlebar Post Handlebar...
  • Page 7 PARTS LIST DESCRIPTION PICTURE HD Touchscreen Arm Inner Hex Round Head Screw M8x1.25x12L Inner Hex Round Head Screw M8x1.25x10L Flat Washer (φ8.2xφ16x2t) Socket Hex Screw M8x1.25x20L Weight Holder Right & Left Philips Round Head Screw M5x0.8x15L Pedals...
  • Page 8 PARTS LIST DESCRIPTION PICTURE Touchscreen Strap Water Bottle Holder Cups Touchscreen Touchscreen Screws Cleats Inner Hex Round Head Screw M5x0.8x8L M5 Washer M5 Spring Washer Power Supply & Power Cord...

  • Page 9: Hardware Kit

    HARDWARE KIT DESCRIPTION PICTURE L-Hex Wrench 6mm/35Lx95L L-Hex Wrench 5.5mm L-Hex Wrench L-Hex Wrench Combination Wrench 15mm Wrench Calibration Kit Note: Not needed during initial install.

  • Page 10: Assembly

    ASSEMBLY Front/Rear Stabilizer Assembly 1. Front Stabilizer Attach the Front Stabilizer (2) to the Frame (1) with four M8x1.25x20L Socket Hex Screws (10). Use 6mm L-Hex Wrench (A) to tighten the screw.
  • Page 11 ASSEMBLY 2. Rear Stabilizer Attach the Rear Stabilizer (3) to the Frame (1) with four M8x1.25x20L Socket Hex Screws (10). Use 6mm L-Hex Wrench (A) to tighten the screw.

  • Page 12: Pedal

    ASSEMBLY Pedal Assembly 1. Using a 15mm wrench, fully tighten the Right Pedal (13-1) clockwise into the Right Crank Arm until flush and no threads are showing. 2. Using a 15mm wrench, fully tighten the Left Pedal (13-2) counter- clockwise into the left Crank Arm until flush and no threads are show- ing.

  • Page 13: Handlebar Assembly

    (8). Use four 8.2X 16*2T flat washers (9) when attaching the screws. Use 5mm L-Hex Wrench (B) to tighten the screws. 2. Water Bottle Holder Assembly Attach water bottle holder cups (15) to the bike frame (1) using 3mm allen key (D).
  • Page 14 ASSEMBLY 2. Handlebar to Frame Assembly Loosen the Large L-Handle (a) on the Frame (1) and insert the Handle- bar Post (4) into the Frame. Move the Handlebar Post (4) upward or downward to the desired position and then tighten the Large L-Han- dle.
  • Page 15 ASSEMBLY 3. Handlebar Post Assembly A. To adjust the height of the handlebar post, first loosen the Large L-Handle. Then move the handlebar post upward or downward to the desired position and firmly tighten the Large L-Handle. B. Screw with one M5x0.8x15L Round Head Screw (12) at the end of the handlebar post with phillips head screwdriver end of 6mm allen key (A), to prevent pull out the handlebar post when move upward.
  • Page 16 ASSEMBLY 4. HD Touchscreen Arm Insert the touchscreen mount (6) into the handlebars (5). Ensure that parts (b) and (d) are fully engaged with each other so no metal is showing. Use 6mm L-Hex Wrench (B) to tighten the screw.
  • Page 17 A. Screw the touchscreen (16) onto the touchscreen arm (6) using the 4 touchscreen screws (17). B. Attach the monitor cable from the bike frame to the touchscreen. Plug the two cords into the back of the touchscreen on the right. Plug the shorter cord to the right-most port.

  • Page 18: Check Seat

    ASSEMBLY Check Seat 1. To adjust the height of the seat post, first loosen the Large L-Handle (a). Then, move the seat post upward or downward to desired position and firmly tighten the Large L-Handle. 2. To adjust the horizontal position of the seat, first loosen the Large L-Handle (e).

  • Page 19: Weight Holder

    ASSEMBLY Weight Holder Attach Weight Holder (11-1 & 11-2) to the back of the Seat Assembly with four M5x0.8x12L Round Head Screws (12). Use M5 washer (19) and one M5 spring washer (20) while attaching the screws. Use 4mm L-Hex Wrench (C) to tight- en the screws.

  • Page 20: Adjust Leveling Feet

    ASSEMBLY Adjust the Leveling Feet 1. Place the exercise bike in the location where it will be used. Make sure that all 6 leveling feet are in contact with the floor. If a leveling foot is not in contact with the floor, adjust the leveling foot by hand until the leveling foot contacts the floor.

  • Page 21: Plug In Power Equipment

    1. When plugging the power supply into the wall, ensure the power sup- ply lights up green. 2. Plug the other end of the power supply (22) into the bottom back of the bike frame (1). Press firmly to ensure power cord is fully plugged in.

  • Page 22: Finished Bike Diagram

    COMPLETED ASSEMBLY...

Table of Contents

Save PDF