Sony KP 61V75 Operating Instructions Manual page 14

Connecting a DVD player with component video output connectors
Component video terminals Y/C
sharper, higher resolution picture by reducing the
amount of signal processing thus creating a more
accurate reproduction of the source.
If your DVD player has component video output
connectors, connect them to VIDEO 4 IN on the
projection TV in the following way.
C (red)
R
C (blue)
B
Y (green)
S-LINK
Rear of projection TV
Notes
• Connect your DVD player directly to your TV. Connecting the
DVD player through other video equipment will cause
unwanted picture noise.
• When the DVD player is connected using VIDEO 4 IN, its
MONITOR OUT signals cannot be output.
• Some DVD player connectors may be labeled Y, B-Y, and R-Y.
In this case, connect Y (green) on the projection TV to Y on the
DVD player, C (blue) to B-Y, and C
B
• The jacks of this projection TV are colored in green (Y), blue
(C ), and red (C ). If line output connectors of your DVD player
B R
have different colors, make connections according to their
labels.
• Because the high quality pictures on a DVD disc contain a lot of
information, picture noise may appear. In this case, reduce the
SHARPNESS level in the VIDEO menu (see SHARPNESS on
page 31).
• If the incorrect colors appear when using this component video
input, recheck the connections they may be reversed.
14 -EN
Getting Started
/C provide a
B R
Y
VIDEO1
C
B
VIDEO3
C
R
VIDEO4
L
TV OUT
R
AUDIO
VIDEO 4
CONTROL S
OUT IN
AUDIO-R (red)
AUDIO-L (white)
(red) to R-Y.
R
VMC-10HG
(not supplied)
LINE OUT S VIDEO OUT
R - A U D I O 1 - L VIDEO
Audio
outputs
RK-74A
(not supplied)
Component video
outputs
COMPONENT VIDEO OUT S-LINK DIGITAL OUT
Y C C OPTICAL COAXIAL
B R
DVD