TIG ignition Non-contact floor, must be placed on the floor. from the welding operations site and if removal is Model ENTRIX 200 UK • The electrical arc must not be touched. not possible, cover flammable materials with fire • Electrical power must be shut down prior to cleaning retardant covering.
Page 3
3.5.GASES AND FUMES 5. DEVICE USE CABLE CONNECTIONS Base Amps – current sustaining the arch in the PULS PLEASE NOTE! GAS MAY BE LETHAL OR DANGEROUS 5.1. ENTRIX 200 UK DEVICE DESCRIPTION MMA WELDING MODE TO HUMAN HEALTH! mode Front view: Rear view: Set the switch (19) to MMA welding mode.
Page 4
NOTES/NOTIZEN cable with TIG torch workpiece ground cable gas tank gas reducer 6. CLEANING AND MAINTENANCE • Always unplug the device before cleaning it and when the device is not in use. • Use cleaners without corrosive substances to clean each surface.
Page 5
Umwelt – und Entsorgungshinweise Hersteller an Verbraucher Sehr geehrte Damen und Herren, gebrauchte Elektro – und Elektronikgeräte dürfen gemäß europäischer Vorgaben [1] nicht zum unsortierten Siedlungsabfall gegeben werden, sondern müssen getrennt erfasst werden. Das Symbol der Abfalltonne auf Rädern weist auf die Notwendigkeit der getrennten Sammlung hin.
Need help?
Do you have a question about the ENTRIX 200 UK and is the answer not in the manual?
Questions and answers