Panasonic TH-P50U30D Service Manual
Hide thumbs Also See for TH-P50U30D:

Advertisement

TH-P50U30D
Model No.
TH-P50U30G
TH-P50U30K
TH-P50U30M
TH-P50U30P
TH-P50U30S
TH-P50U30T
TH-P50U30V
GPF14D-A Chassis
© Panasonic Corporation 2011.
Unauthorized copying and distribution is a violation
of law.
ORDER NO.PAVCTH1103009CE
Plasma Television

Advertisement

Table of Contents
loading

Summary of Contents for Panasonic TH-P50U30D

  • Page 1 ORDER NO.PAVCTH1103009CE Plasma Television TH-P50U30D Model No. TH-P50U30G TH-P50U30K TH-P50U30M TH-P50U30P TH-P50U30S TH-P50U30T TH-P50U30V GPF14D-A Chassis © Panasonic Corporation 2011. Unauthorized copying and distribution is a violation of law.
  • Page 2: Table Of Contents

    TABLE OF CONTENTS PAGE PAGE 1 Safety Precautions -----------------------------------------------3 11 Wiring Connection Diagram -------------------------------- 41 1.1. General Guidelines ----------------------------------------3 11.1. Caution statement. -------------------------------------- 41 11.2. Wiring (1) -------------------------------------------------- 41 1.2. Touch-Current Check--------------------------------------3 11.3. Wiring (2) -------------------------------------------------- 42 2 Warning --------------------------------------------------------------4 2.1.
  • Page 3: Safety Precautions

    1 Safety Precautions 1.1. General Guidelines 1. When conducting repairs and servicing, do not attempt to modify the equipment, its parts or its materials. 2. When wiring units (with cables, flexible cables or lead wires) are supplied as repair parts and only one wire or some of the wires have been broken or disconnected, do not attempt to repair or re-wire the units.
  • Page 4: Warning

    2 Warning 2.1. Prevention of Electrostatic Discharge (ESD) to Electrostatically Sensitive (ES) Devices Some semiconductor (solid state) devices can be damaged easily by static electricity. Such components commonly are called Elec- trostatically Sensitive (ES) Devices. Examples of typical ES devices are integrated circuits and some field-effect transistors and semiconductor [chip] components.
  • Page 5: About Lead Free Solder (Pbf)

    2.2. About lead free solder (PbF) Note: Lead is listed as (Pb) in the periodic table of elements. In the information below, Pb will refer to Lead solder, and PbF will refer to Lead Free Solder. The Lead Free Solder used in our manufacturing process and discussed below is (Sn+Ag+Cu). That is Tin (Sn), Silver (Ag) and Copper (Cu) although other types are available.
  • Page 6: Service Navigation

    3 Service Navigation 3.1. PCB Layout Board Name Function Board Name Function Power Supply Data Driver (Lower Right) Non serviceable. Data Driver (Lower Center) P-Board should be exchange for service. Data Driver (Lower Left) Main AV input, processing Scan Drive Remote receiver, Power LED, C.A.T.S sensor Sustain Drive Scan out (Upper)
  • Page 7: Applicable Signals

    3.2. Applicable signals COMPONENT (Y, P ), HDMI * Mark: Applicable input signal Signal name COMPONENT HDMI 525 (480) / 60i 525 (480) / 60p 625 (576) / 50i 625 (576) / 50p 750 (720) / 60p 750 (720) / 50p 1,125 (1,080) / 60i 1,125 (1,080) / 50i 1,125 (1,080) / 60p...
  • Page 8: Specifications

    4 Specifications Power Source AC 220 - 240 V, 50 / 60 Hz (Except P) AC 110 - 240 V, 50 / 60 Hz (P) Power Power Rating 320 W (Except P) 325 W (P) Standby condition 0.4 W Display panel Aspect Ratio 16:9 Visible screen size...
  • Page 9 ETHERNET 10BASE-T / 100BASE-TX Dimensions (W × H × D) 1,212 mm × 782 mm × 324 mm (With Pedestal) 1,212 mm × 747 mm × 93 mm (TV only) Mass 34.0 kg Net (With Pedestal) 30.0 kg Net (TV only) Note •...
  • Page 10: Service Mode

    5 Service Mode 5.1. How to enter into Service Mode 5.1.1. Purpose After exchange parts, check and adjust the contents of adjustment mode. While pressing [VOLUME ( - )] button of the main unit, press [i] button of the remote control three times within 2 seconds. 5.1.2.
  • Page 11 5.1.4. Contents of adjustment mode • Value is shown as a hexadecimal number. • Preset value differs depending on models. • After entering the adjustment mode, take note of the value in each item before starting adjustment. Main item Sub item Sample Data Remark ADJUST...
  • Page 12: Option - Mirror

    5.2. Option - Mirror Picture can be reversed left and right or up and down. 00 : Default (Normal picture is displayed) 01 : Picture is reversed left and right. 02 : Picture is reversed up and down. Hint : If the defective symptom (e.g. Vertical bar or Horizontal bar) is moved by selection of this mirror, the possible cause is in A-board.
  • Page 13: Hotel Mode

    5.4. Hotel mode 1. Purpose Restrict a function for hotels. Item Function 2. Access command to the Hotel mode setup menu Hotel Mode Select hotel mode On/Off In order to display the Hotel mode setup menu: Initial INPUT Select input signal modes. While pressing [VOLUME (-)] button of the main unit, Set the input, when each time power is switched press [AV] button of the remote control three times within...
  • Page 14: Data Copy By Sd Card

    5.5. Data Copy by SD Card 5.5.1. Purpose (a) Board replacement (Copy the data when exchanging A-board): When exchanging A-board, the data in original A-board can be copied to SD card and then copy to new A-board. (b) Hotel (Copy the data when installing a number of units in hotel or any facility): When installing a number of units in hotel or any facility, the data in master TV can be copied to SD card and then copy to other TVs.
  • Page 15 5.5.3. Data copy from TV set to SD Card 1. Turn on the TV set. 2. Insert SD card with a startup file (pwd file) to SD slot. On-screen Display will be appeared according to the startup file automatically. 3. Input a following password for (a) or (b) by using remote control. (a) For Board replacement : 2770 (b) For Hotel : 4850 Data will be copied from TV set to SD card.
  • Page 16 5.5.4. Data copy from SD Card to TV set 1. Turn on the TV set. 2. Insert SD card with Data to SD slot. On-screen Display will be appeared according to the Data folder automatically. 3. Input a following password for (a) or (b) by using remote control. (a) For Board replacement : 2771 (b) For Hotel : 4851 Data will be copied from SD card to TV set.
  • Page 17: Troubleshooting Guide

    6 Troubleshooting Guide Use the self-check function to test the unit. 1. Checking the IIC bus lines 2. Power LED Blinking timing 6.1. Check of the IIC bus lines 6.1.1. How to access 6.1.1.1. Self-check indication only: Produce TV reception screen, and while pressing [VOLUME ( - )] button on the main unit, press [OK] button on the remote control for more than 3 seconds.
  • Page 18: Power Led Blinking Timing Chart

    6.2. Power LED Blinking timing chart 1. Subject Information of LED Flashing timing chart. 2. Contents When an abnormality has occurred the unit, the protection circuit operates and reset to the stand by mode. At this time, the defective block can be identified by the number of blinks of the Power LED on the front panel of the unit. Blinking Times Contents Check point...
  • Page 19: No Picture

    6.4. No Picture...
  • Page 20: Local Screen Failure

    6.5. Local screen failure Plasma display may have local area failure on the screen. Fig-1 is the possible defect P.C.B. for each local area. Fig-1...
  • Page 21: Service Fixture & Tools

    7 Service Fixture & Tools 7.1. SC jig Purpose: To find the failure board (SC or SU/SD) when the power LED is blinking 7 times. SC jig: Jumper connector to connect to SC50 connector on SC board Part number: TZSC09187 How to use: Caution: Remove SC jig from SC board after inspection.
  • Page 22: Disassembly And Assembly Instructions

    8 Disassembly and Assembly Instructions 8.1. Remove the Rear cover 8.4. Remove Side terminal cover 1. See PCB Layout (Section 3) 8.2. Remove the AC inlet 1. Remove the screws (×2 2. Remove the Side terminal cover. Caution: To remove P.C.B. wait 1 minute after power was off for dis- charge from electrolysis capacitors.
  • Page 23: Remove The A-Board

    8.6. Remove the A-Board 8.8. Remove the SU-Board 1. Remove the Tuner unit. (See section 8.5.) 1. Disconnect the flexible cables (SU1, SU2, SU3, SU4 and SU5) connected to the SU-Board. 2. Remove the screws (×2 ) and remove the A-Board. 2.
  • Page 24: Remove The Sc-Board

    8.10. Remove the SC-Board 8.12. Remove the Stand bracket and the Hanger metals 1. Remove the SU-Board and SD-Board. (See section 8.8. and 8.9.) 1. Remove the Plasma panel section from the servicing 2. Disconnect the connector (SC2). stand and lay on a flat surface such as a table (covered 3.
  • Page 25: Remove The Radiator Plate

    8.13. Remove the Radiator plate 8.17. Remove the Plasma panel sec- tion from the Cabinet assy 1. Remove the Stand bracket and the Hanger metals. (See section 8.12.) 1. Remove the Plasma panel fastening screws (×4 ) and 2. Remove the screws (×15 ) and remove the Radiator remove the Cabinet assy.
  • Page 26: Remove The Attachment Metal Bottom

    8.18. Remove the Attachment metal 8.20. Remove the Glass holders bottom 1. Remove the Cabinet assy. (See section 8.17.) 2. Remove the screws (×7 1. Remove the Radiator plate. (See section 8.13.) 3. Remove the Glass holder top. 2. Remove the screws (×1 each) and remove the Attach- 4.
  • Page 27: Replace The Plasma Panel

    8.22. Replace the Plasma panel Caution: A new Plasma panel itself without Hanger metals is fragile. To avoid the damage to new Plasma panel, carry a new Plasma panel taking hold of the Hanger metals after assembling the Hanger metals and the Stand bracket. 1.
  • Page 28: Measurements And Adjustments

    9 Measurements and Adjustments 9.1. Adjustment 9.1.1. Vsus selection Caution: When Plasma panel or A-board is replaced, Vsus should be set to LOW. Procedure 1. Go into main item [VSUS] in Service Mode. LOW will be displayed. 2. Press [OK] button to go to TEST stage. White pattern without On-Screen Display will be displayed during TEST and CONF stage.
  • Page 29 9.1.2. Sub-Contrast adjustment Name of measuring instrument Connection Remarks RF generator Base Band signal generator HD signal generator Steps Remarks Connect IIC cable (bus controller-cable) after banner OSD appear. Note: And after SRQ-L, begin an adjustment 2 seconds later. Sub-contrast adjustment is unadjusted for AV/ HD input.
  • Page 30 Steps Remarks Another procedure Connect IIC cable (bus controller-cable) after banner OSD appear. And after SRQ-L, begin an adjustment 2 seconds later. Adjustment of HD system 1. At 1080i 100% Full White or Split colour bar receive component signal, as shown below. 2.
  • Page 31 9.1.3. White balance adjustment The adjusting method is different according to the PEAKS EEPROM version. [copy adjustment] : Peaks EEPROM ver.1.00- [Differential and copy adjustment] : Peaks EEPROM ver.1.**- Name of measuring instrument Connection Remarks W/ B pattern Panel surface Color analyzer (Minolta CA-100 or equivalent) Steps...
  • Page 32 Steps Remarks [Differential and copy adjustment] Execute adjustment for color temp. [NORMAL], and set data for color temp. [COOL], [WARM] by data shift WB of HD (or PAL) copies the adjustment data from an adjusted format side. Note: The adjustment does only color temp. [NORMAL]. A adjustment value difference from [NORMAL] is written to EEPROM as for [COOL] and [WARM] by operat- ing a [OK] key.
  • Page 35: Block Diagram

    10 Block Diagram 10.1. Main Block Diagram DIGITAL SIGNAL PROCESSOR HDMI1-3 (HDMI2) ETHERNET DATA TMDS DATA LAN CON I/F ETHER PHY ETHERNET HDMI I/F SIF_OUT SIF I/F SD CARD DATA G/S ONLY SD CARD SD CARD I/F IFD_OUT SLOT TUNER TUNER I/F USB 1,2 USB I/F...
  • Page 36: Block (1/4) Diagram

    10.2. Block (1/4) Diagram SPEAKER_L SPEAKER_R JK3001 D3050 JK8531 (SIDE) HEADPHONE DIGITAL JK8650 JK8702 JK4601 JK4600 JK4602 USB1 USB2 AUDIO TU4801 SD CARD ANT IN ETHERNET HDMI2 HDMI1 HDMI3 DIGITAL SIGNAL PROCESSOR TUNER G/S ONLY DMD_ IIC0 Q4500 IC4900 AUDIO AMP IC8532 IC8601 SOUND15V...
  • Page 37: Block (2/4) Diagram

    10.3. Block (2/4) Diagram DIGITAL SIGNAL PROCESSOR IC9300 PD5L VIDEO DATA PLASMA AI VIDEO DATA LVDS DATA H/V Sync Control VIDEO DATA P+3.3V Sub Filed Processor IC9304 P+3.3V P+3.3V SI/SO SOS8_SS IIC0 FLASH I/F FLASH SOS8_SS P_S0 DATA DRIVER CONTROL P_S1 D_UHZ IC5000...
  • Page 38: Block (3/4) Diagram

    10.4. Block (3/4) Diagram POWER SUPPLY COLD COLD AC CORD Fuse AC Vin PHOTO (Live) Detection COUPLER (Neutral) FILTER STANDBY SS11 VOLTAGE CONVERTER T101 FET SW Vsus P+15V FET SW Relay F15V for prevention of inrush current F15V STB5V Drop IC SOUND15V OCP/OVP P+15V...
  • Page 39: Block (4/4) Diagram

    10.5. Block (4/4) Diagram SUSTAIN DRIVE SCAN DRIVE TPVSUS TPVSUS Vsus SCAN OUT (UPPER) Vsus P+15V D16618 IC14601-03 MAIN H Q16607 IC16131 Q16001 CERS VF5V PDP SCAN Q16002 IC16684 DRIVER VSCN-F BUFFER CPH1 CPH1 BUFFER Q16600 TPSS1 PDP SCAN IC16784,85 Q16041 IC16151 DRIVER...
  • Page 41: Wiring Connection Diagram

    11 Wiring Connection Diagram 11.1. Caution statement. Caution: Please confirm that all flexible cables are assembled correctly. Also make sure that they are locked in the connectors. Verify by giving the flexible cables a very slight pull. 11.2. Wiring (1)
  • Page 42: Wiring (2)

    11.3. Wiring (2) 11.4. Wiring (3)
  • Page 43: Wiring (4)

    11.5. Wiring (4)
  • Page 44 Model No. : TH-P50U30D/G/K/M/P/S/T/V Schematic Diagram Note...
  • Page 45 Model No. : TH-P50U30D/G/K/M/P/S/T/V Replacement Parts List Note...
  • Page 46 Model No. : TH-P50U30D/G/K/M/P/S/T/V A-Board (1/12)
  • Page 47 Model No. : TH-P50U30D/G/K/M/P/S/T/V A-Board (2/12)
  • Page 48 Model No. : TH-P50U30D/G/K/M/P/S/T/V A-Board (3/12)
  • Page 49 Model No. : TH-P50U30D/G/K/M/P/S/T/V A-Board (4/12)
  • Page 50 Model No. : TH-P50U30D/G/K/M/P/S/T/V A-Board (5/12)
  • Page 51 Model No. : TH-P50U30D/G/K/M/P/S/T/V A-Board (6/12) and K-Board...
  • Page 52 Model No. : TH-P50U30D/G/K/M/P/S/T/V A-Board (7/12)
  • Page 53 Model No. : TH-P50U30D/G/K/M/P/S/T/V A-Board (8/12) S-10...
  • Page 54 Model No. : TH-P50U30D/G/K/M/P/S/T/V A-Board (9/12) S-11...
  • Page 55 Model No. : TH-P50U30D/G/K/M/P/S/T/V A-Board (10/12) S-12...
  • Page 56 Model No. : TH-P50U30D/G/K/M/P/S/T/V A-Board (11/12) S-13...
  • Page 57 Model No. : TH-P50U30D/G/K/M/P/S/T/V A-Board (12/12) S-14...
  • Page 58 Model No. : TH-P50U30D/G/K/M/P/S/T/V C1-Board S-15...
  • Page 59 Model No. : TH-P50U30D/G/K/M/P/S/T/V C2-Board (1/2) S-16...
  • Page 60 Model No. : TH-P50U30D/G/K/M/P/S/T/V C2-Board (2/2) S-17...
  • Page 61 Model No. : TH-P50U30D/G/K/M/P/S/T/V C3-Board (1/2) S-18...
  • Page 62 Model No. : TH-P50U30D/G/K/M/P/S/T/V C3-Board (2/2) S-19...
  • Page 63 Model No. : TH-P50U30D/G/K/M/P/S/T/V SC-Board (1/4) S-20...
  • Page 64 Model No. : TH-P50U30D/G/K/M/P/S/T/V SC-Board (2/4) S-21...
  • Page 65 Model No. : TH-P50U30D/G/K/M/P/S/T/V SC-Board (3/4) S-22...
  • Page 66 Model No. : TH-P50U30D/G/K/M/P/S/T/V SC-Board (4/4) S-23...
  • Page 67 Model No. : TH-P50U30D/G/K/M/P/S/T/V SS-Board (1/2) S-24...
  • Page 68 Model No. : TH-P50U30D/G/K/M/P/S/T/V SS-Board (2/2) S-25...
  • Page 69 Model No. : TH-P50U30D/G/K/M/P/S/T/V A-Board (Foil Side) S-26...
  • Page 70 Model No. : TH-P50U30D/G/K/M/P/S/T/V A-Board (Component Side) S-27...
  • Page 71 Model No. : TH-P50U30D/G/K/M/P/S/T/V K-Board S-28...
  • Page 72 Model No. : TH-P50U30D/G/K/M/P/S/T/V C1-Board S-29...
  • Page 73 Model No. : TH-P50U30D/G/K/M/P/S/T/V C2-Board S-30...
  • Page 74 Model No. : TH-P50U30D/G/K/M/P/S/T/V C3-Board S-31...
  • Page 75 Model No. : TH-P50U30D/G/K/M/P/S/T/V SC-Board (Foil Side) S-32...
  • Page 76 Model No. : TH-P50U30D/G/K/M/P/S/T/V SC-Board (Component Side) S-33...
  • Page 77 Model No. : TH-P50U30D/G/K/M/P/S/T/V SS-Board S-34...
  • Page 78 Model No. : TH-P50U30D/G/K/M/P/S/T/V Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks TZTNP01MEUV A-PRINT COMPLETE 1 (V) (RTL)PAVCTH TZTNP01MKUG A-PRINT COMPLETE 1 (G) (RTL)PAVCTH TZTNP01MMUT A-PRINT COMPLETE 1 (T) (RTL)PAVCTH TZTNP01MNUD A-PRINT COMPLETE 1 (D) (RTL)PAVCTH...
  • Page 79 Model No. : TH-P50U30D/G/K/M/P/S/T/V Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks C3034 F1J1A106A043 C 10UF, 10V C3035 F1G1C104A077 C 0.1UF 16V C3036 ECJ1VB1A105K C 1UF, 10V C3037 ECJ1VB1A105K C 1UF, 10V C3038 ECJ1VB1A105K C 1UF, 10V...
  • Page 80 Model No. : TH-P50U30D/G/K/M/P/S/T/V Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks C4914 F1H1H104A970 C 0.1UF, , 50V C4915 F1J1E105A231 C 1 UF 25V C4916 F1H1H104A970 C 0.1UF, , 50V C4918 F1J1E4740001 C 0.47UF, 25V 1 PAVCTH...
  • Page 81 Model No. : TH-P50U30D/G/K/M/P/S/T/V Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks C8031 F1G1C104A077 C 0.1UF 16V C8034 F1G1C104A077 C 0.1UF 16V C8035 F1G1C104A077 C 0.1UF 16V C8037 F1J1A106A087 C 10UF, 10V C8041 F1G1C104A077 C 0.1UF 16V...
  • Page 82 Model No. : TH-P50U30D/G/K/M/P/S/T/V Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks C8539 F1G1C104A077 C 0.1UF 16V C8542 F1J1A106A043 C 10UF, 10V C8543 F1G1C104A077 C 0.1UF 16V C8544 F1J1A106A043 C 10UF, 10V C8545 F1G1C104A077 C 0.1UF 16V...
  • Page 83 Model No. : TH-P50U30D/G/K/M/P/S/T/V Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks C9328 F1G1C104A077 C 0.1UF 16V C9330 F1G1A105A047 C 1UF 10V C9331 F1G1A105A047 C 1UF 10V C9332 F1G1A105A047 C 1UF 10V C9335 F1J1A106A043 C 10UF, 10V...
  • Page 84 Model No. : TH-P50U30D/G/K/M/P/S/T/V Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks C16280 F1K1E105A029 C 1UF, 25V C16285 F1H1H104A970 C 0.1UF, , 50V C16286 F1H1H104A970 C 0.1UF, , 50V C16287 F1H1H104A970 C 0.1UF, , 50V C16314 F2A2E141A217...
  • Page 85 Model No. : TH-P50U30D/G/K/M/P/S/T/V Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks C16796 F1K1E475A134 C 4.7UF 25V C16797 F1H1H104A970 C 0.1UF, , 50V C16813 F2A2T1210001 E 120UF, 220V 1 PAVCTH C16833 F1K2J222A014 C 2200PF ,630V C16834 F1K2J222A014...
  • Page 86 Model No. : TH-P50U30D/G/K/M/P/S/T/V Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks K1MY55B00002 55P CONNECTOR K1MY55B00002 55P CONNECTOR K1MY55B00002 55P CONNECTOR K1MY55B00002 55P CONNECTOR K1MY55B00002 55P CONNECTOR K1MY55B00002 55P CONNECTOR K1MY55B00002 55P CONNECTOR K1MY55B00002 55P CONNECTOR...
  • Page 87 Model No. : TH-P50U30D/G/K/M/P/S/T/V Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks D16407 B0JCME000093 DIODE D16411 B0ADCJ000100 DIODE D16413 B0ACCJ000048 DIODE D16421 B0FCBN000001 DIODE 1 PAVCTH D16430 B0ECKP000055 DIODE D16432 B0ECKP000055 DIODE D16433 B0ECKP000055 DIODE D16461 B0FCCN000003...
  • Page 88 Model No. : TH-P50U30D/G/K/M/P/S/T/V Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks D17101 B0ACCJ000048 DIODE D17102 B0ACCJ000048 DIODE D17103 B0JCCD000020 DIODE 1 PAVCTH D17301 B0ACCJ000048 DIODE D17302 B0ACCJ000048 DIODE D17303 B0JCCD000020 DIODE 1 PAVCTH FL8531 J0ZZB0000142...
  • Page 89 Model No. : TH-P50U30D/G/K/M/P/S/T/V Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks IC16471 C0DBEYY00114 IC16490 C0DBZMC00006 IC16491 C0BBAA000008 LINEAR IC IC16501 C0ZBZ0001822 1 PAVCTH IC16502 C0ZBZ0001822 1 PAVCTH IC16521 C0ZBZ0001822 1 PAVCTH IC16522 C0ZBZ0001822 1 PAVCTH...
  • Page 90 Model No. : TH-P50U30D/G/K/M/P/S/T/V Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks L4803 G1CR39J00009 INDUCTION COIL 1 (G) (S) L4804 G1CR39J00009 INDUCTION COIL 1 (G) (S) L4805 J0JGC0000020 CHIP INDUCTOR L4806 J0JGC0000020 CHIP INDUCTOR L4811 J0JCC0000278...
  • Page 91 Model No. : TH-P50U30D/G/K/M/P/S/T/V Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks Q4504 B1ABCF000231 TRANSISTOR Q4930 B1ADCF000194 TRANSISTOR 1 PAVCTH Q4971 B1ABCE000015 TRANSISTOR Q4972 DSA200100L TRANSISTOR Q4973 B1AAFB000004 TRANSISTOR 1 PAVCTH Q4974 B1AAFB000004 TRANSISTOR 1 PAVCTH...
  • Page 92 Model No. : TH-P50U30D/G/K/M/P/S/T/V Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks R1011 D0GA101JA015 M 100 OHM, J,1/16W R1013 D0GA101JA015 M 100 OHM, J,1/16W R1014 D0GA101JA015 M 100 OHM, J,1/16W R1015 D0GA101JA015 M 100 OHM, J,1/16W...
  • Page 93 Model No. : TH-P50U30D/G/K/M/P/S/T/V Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks R3146 D0GA104JA023 M100KOHM, J.1/16 W R3147 D0GAR00J0005 M 0 OHM, 1/16W R3148 D0GA104JA023 M100KOHM, J.1/16 W R3149 D0GA222JA023 M 2.2KOHM, J,1/16W R3150 D0GA222JA023 M 2.2KOHM, J,1/16W...
  • Page 94 Model No. : TH-P50U30D/G/K/M/P/S/T/V Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks R4692 D0GA473JA015 M 47KOHM, J,1/16W R4693 D0GA473JA015 M 47KOHM, J,1/16W R4802 D0GA103JA015 M 10KOHM,J,1/16W 1 (G) (S) R4805 D0GAR00J0005 M 0 OHM, 1/16W 1 (G) (S)
  • Page 95 Model No. : TH-P50U30D/G/K/M/P/S/T/V Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks R8208 D1BA1001A014 M 1KOHM,J. 1/16 W R8217 D0GA221JA023 M220 OHM, J.1/16 W R8218 D0GA221JA023 M220 OHM, J.1/16 W R8219 D1BA2400A014 M 240 OHM,J.1/16 W...
  • Page 96 Model No. : TH-P50U30D/G/K/M/P/S/T/V Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks R8653 D0GA560JA023 M 56 OHM, J,1/16W R8654 EXB28V560JX M 56 OHM 1/32 W R8655 D0GA560JA023 M 56 OHM, J,1/16W R8656 D0GA560JA023 M 56 OHM, J,1/16W...
  • Page 97 Model No. : TH-P50U30D/G/K/M/P/S/T/V Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks R8960 D0GA272JA023 M 2.7KOHM, J.1/16W R8961 EXB28V332J M 3.3 KOHM 1/32 W R8963 D0GA103JA015 M 10KOHM,J,1/16W R8964 D0GA103JA015 M 10KOHM,J,1/16W R8965 EXB28V103JX M 10KOHM 1/32 W...
  • Page 98 Model No. : TH-P50U30D/G/K/M/P/S/T/V Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks R16134 D0GD750JA059 M 75 OHM,J,1/4W R16135 D0GB4R7JA065 M 4.7 OHM J 1/10W 1 PAVCTH R16137 D0GZ1R0JA020 M 1 OHM, J,1/2W R16138 D0GF561JA047 M 560 OHM,J, 1/3W...
  • Page 99 Model No. : TH-P50U30D/G/K/M/P/S/T/V Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks R16422 D0GF7R5JA047 M 7.5 OHM,J, 1/3W R16423 D0GF7R5JA047 M 7.5 OHM,J, 1/3W R16441 D0GF5R6JA047 M 5.6 OHM,J, 1/3W R16451 D0GF5R6JA047 M 5.6 OHM,J, 1/3W...
  • Page 100 Model No. : TH-P50U30D/G/K/M/P/S/T/V Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks R16591 EXB38V472JV M 4.7 kOHM 1/16 W R16594 D0GB472JA065 M 4.7KOHM, J,1/10W R16601 D0GF1R0JA047 M 1 OHM,J,1/3W R16604 D0GD331JA052 M 330 OHM,J,1/4W 1 PAVCTH...
  • Page 101 Model No. : TH-P50U30D/G/K/M/P/S/T/V Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks R16829 D0GB102JA065 M 1KOHM,J,1/10W R16831 D1BD6812A077 M68.1KOHM,D.1/10W 1 PAVCTH R16832 D1BD7152A077 M71.5K0OHM,D.1/10W 1 PAVCTH R16833 ERG1SJ683 M 68KOHM, J, 1W R16834 ERG1SJ683 M 68KOHM, J, 1W...
  • Page 102 Model No. : TH-P50U30D/G/K/M/P/S/T/V Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks R17168 D1BB49R90002 M 49 OHM,J.1/10W R17196 D0GB102JA065 M 1KOHM,J,1/10W R17198 D0GD224JA052 M 220KOHM,J,1/8W 1 PAVCTH R17199 D0GF102JA047 M 1.0 KOHM,J,1/3W R17201 D0GB101JA065 M 100 OHM,J,1/10W...
  • Page 103 Model No. : TH-P50U30D/G/K/M/P/S/T/V Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks RM2810 B3RAD0000168 REMOTE SENSOR K1KY02B00012 2P CONNECTOR SC20 K1MY35BA0345 35P CONNECTOR SC41 K1KA09AA0707 9P CONNECTOR SC42 K1KA09AA0707 9P CONNECTOR SC46 K1KA09AA0707 9P CONNECTOR SC50...
  • Page 104 Model No. : TH-P50U30D/G/K/M/P/S/T/V Exploded View 1 S-61...
  • Page 105 Model No. : TH-P50U30D/G/K/M/P/S/T/V Exploded View 2 S-62...
  • Page 106 Model No. : TH-P50U30D/G/K/M/P/S/T/V Packing 1 S-63...
  • Page 107 Model No. : TH-P50U30D/G/K/M/P/S/T/V Packing 2 S-64...
  • Page 108 Model No. : TH-P50U30D/G/K/M/P/S/T/V Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks K2AHYH000042 AC INLET WITH CABLE 1 PAVCTH K2CN3YY00006 AC CORD 1 (G) (V) K2CT3YY00021 AC CORD 1 (K) (M) (S) K2CT3YY00033 AC CORD 1 (P) PAVCTH...
  • Page 109 Model No. : TH-P50U30D/G/K/M/P/S/T/V Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks TSXM319 CABLE(A20-SC20) 1 PAVCTH TSXM320 CABLE(A31-C21) 1 PAVCTH TSXM321-1 CABLE(A32-C31) 1 PAVCTH TTU4TA0068 REAR COVER 1 (G) PAVCTH TTU4TA0077 REAR COVER 1 (M) PAVCTH...

Table of Contents