GE Truvitals TM3000 User Manual page 9

(20s)
5. Once a temperature is taken,
the temperature will remain on
screen for five (5) seconds
before going back to standby
mode. Simply press the
measure button again to
take a new temperature.
NOTES: Environment changes can affect the accuracy of
temperature readings. Before use, allow the thermometer to
remain in one location without significant air temperature
changes for 30 minutes.
Wait at least 30 seconds between readings to ensure
accuracy.
In case of error code, refer to the chart on page 13.
Wait at least 30 minutes after strenuous exercise
before taking a temperature reading.
TM3000
Truvitals Non-Touch 2-in-1 Thermometer
4. If the thermometer is not close
enough, a flashing arrow icon
will appear on screen. Move
the thermometer closer until
the flashing arrow icon
disappears, the LCD display
lights up, and a temperature
result appears on screen.If
thermometer is not
repositioned, the arrow icon
will flash for 20 seconds before
the device automatically
turns off.
6. To power off the thermometer,
(60s)
wait 60 seconds for the auto
shutoff feature to power off
the thermometer.
7