Deluxe M618C User Manual

Vertical shape
With RGB light
RGB LED Light
Press the forward key and backward key at the same time for 3s to
turn on or turn off the RGB light.
Specification
DPI
Polling rate
Working voltage
Working current
Compatible system
1000/1200/1600
150Hz
1.5V
≤32mA
Windows 8/10/mac OS
AA battery(Optioall)
6. Backward
7. ON/OFF switch
8. AA battery
9. USB nano receiver
5. Forward
1
2
3
4
5
6
Rebuilding up the Connection between Mouse and Receiver
If your mouse cannot work normally, you can try to build up the
connection again between mouse and receiver, as following steps:
1.Take out the nano receiver from computer and insert again,
it will detect automatically for about 15 seconds.
2.Keep the mouse in ON mode and with battery in correct direction.
3.Keep the effective distance within 10CM between the mouse and
receiver
4.Press the left button and right button at the same time for about
1-3 seconds, then release it. The connection is being built for about
10 seconds.
5.If you cannot build up the connection in 10 seconds, please repeat the
above steps.
Debugging Tips
● Check the receiver if it s connected to the USB port.
● Check the ON/OFF button if in ON mode.
● Check the effective distance between mouse and the receiver,
and shorten it.
● Rebuild up the connection between the mouse and receiver.
7
8
9